User's Manual Part 4

STAR 3000 Installation Manual
Mojix Incorporated
www.mojix.com
[phone]
Page
13
of
36
Confidential and Proprietary
STAR POWER SUPPLY INSTALLATION
Recommended installation of the power supply is a wall mounted configuration within 20 feet from the
STAR Receiver.
Wall Mount Power Supply
Figure 8 shows the power supply with integrated mounting brackets.
Figure 8: STAR Power Supply
The wall mounted power supply requires the following hardware (not included with shipment).
• #6 Drywall (bugle head) or #6 wood screws if the unit is being fastened to a wooden surface
• For a solid wood mount, box nails are a suitable option, provided that the head diameter is more
than .28” and less than .30” in diameter and the shank of the nail is at least 2” long.
• For a metal surface mount that is at least .1875” thick, #6-32 pan head machine screws may be
used.
• For drywall/plaster fastening, 1/8 Molly or Toggle bolts must be used.
The recommended mounting procedure is:
1. For drywall mounts, "Molly Bolts" are preferred. Alternatively, toggle bolts are a suitable option, as
they offer a pull-down force more than 4X the industry standard, and are highly recommended in
areas prone to seismic activity.
2. Alternatively for drywall mounts, Bugle-head #6 Drywall screws (coarse thread) are also acceptable, if
all 4 tie-down points are used, offering an industry standard of a pull-down strength of at least 4X the
weight of the unit.