User's Manual Part 3

STAR 3000 Installation Manual

Mojix Incorporated

www.mojix.com

(877) 886-6549

Page

Confidential and Proprietary

Figure 2: STAR System Topology

SYSTEM COMPONENTS

1. STAR

2. eMux: splitter and amplifier for the RF signal

3. eNode: controls up to 4 antennas to excite tags

4. Master Controller (MCON): application appliance

5. Optional Sensor network to detect activity in specific areas

PAGE 1
STAR 3000 Installation Manual Figure 2: STAR System Topology SYSTEM COMPONENTS 1. STAR 2. eMux: splitter and amplifier for the RF signal 3. eNode: controls up to 4 antennas to excite tags 4. Master Controller (MCON): application appliance 5. Optional Sensor network to detect activity in specific areas Mojix Incorporated www.mojix.
PAGE 2
STAR 3000 Installation Manual Wireless STAR System Topology Figure 3 illustrates Wireless STAR system topology, showing: 1. STAR and power supply, including the command link antenna 2. Wireless 4-port eNode, including the command link antenna 3. Sensor port 4. eNode transmit antennas 5.
PAGE 3
STAR 3000 Installation Manual STAR RECEIVER INSTALLATION STAR Receiver Installation The STAR is mechanically designed for post or wall mounting. Figure 4 illustrates the rear mounting bracket. This bracket is designed to be used with any standard VESA mounting bracket. As shown in the figure, the mounting bracket is installed directly on the STAR Receiver back plate. Installation instructions: 1. Product installation shall be conducted by a qualified installer.
PAGE 4
STAR 3000 Installation Manual Figure 5:: VESA Interface Mount Bracket Side View Figure 6:: VESA Interface Mount Bracket Rear View Figure 7:: VESA Interface Mount Bracket End Profile View Mojix Incorporated www.mojix.