User's Manual Part 2

STAR 3000 Installation Manual
Mojix Incorporated
www.mojix.com
[phone]
STAR: Physical Interfaces
The following figure
illustrates the STAR’s physical interfaces.
Figure
1. 1 TX Output TNC:
Transmit RF Signal, 24 Volts DC, Forward Command Signal
2. 2 TX Output TNC
for Wireless eNode Network
3.
4 RX Input TNC from Antenna(s)
4. 1 RX Input TNC Sync:
Input synchronization signal from master STAR (for multiple
receiving)
5. 1 TX Output TNC Sync:
Output synchronization signal to another STAR
6. 2 Ethernet Interfaces:
Control from MCON
7. 2 USB Interfaces (future use)
8. 1 DC Power Connector
Cabled System Topology
Error! Reference s
ource not found.
items are as follows:
illustrates the STAR’s physical interfaces.
Figure
1: STAR Physical Interfaces
Transmit RF Signal, 24 Volts DC, Forward Command Signal
for Wireless eNode Network
:
Up to two wireless forward command antenna(s)
4 RX Input TNC from Antenna(s)
:
Inputs from receive antenna array OR individual receive antenna(s)
Input synchronization signal from master STAR (for multiple
Output synchronization signal to another STAR
Control from MCON
, Status Monitoring and
Tag Read Packets
ource not found.
illustrates the components of the STAR
system topology
Page
8
of
36
Confidential and Proprietary
Up to two wireless forward command antenna(s)
Inputs from receive antenna array OR individual receive antenna(s)
Input synchronization signal from master STAR (for multiple
simultaneous
Tag Read Packets
system topology
. These