Replacement Part List

Multi-Use Hitch for ZTR and Garden Tractors

Item #’s 68223 & 68334

Parts List

This hitch system is designed to fit on many different brands of

mowers. Please see the Lawn Tractor and ZTR Hitch Assembly

instructions (back) and style diagram to find your specific ZTR

bumper style

NEED HELP? Please call our customer service line before

returning to the store. 1-877- 575-3173. TheMojack.com

ZTR bumper styles

Multi-Use Hitch

Basic Lawn Tractor bumper style

MTD Brands

MTD brands

Craftsman brands

Cub Cadet brands

John Deere

brands

Husqvarna brands

Craftsman brands

ZTR hitch assembly may be slightly different based on one of these 4 ZTR bumper styles.

Please visit the site link below to get hitch assembly instructions for the specific ZTR brand

http://www.themojack.com/products/accessories/hitch-multi-use-hitch.html

Formed Channel Type

Tube Type with Factory hitch

Tube Type without Factory hitch

PAGE 1
NEED HELP? Please call our customer service line before returning to the store. 1-877- 575-3173. TheMojack.com Multi-Use Hitch for ZTR and Garden Tractors Item #’s 68223 & 68334 ZTR hitch assembly may be slightly different based on one of these 4 ZTR bumper styles. Please visit the site link below to get hitch assembly instructions for the specific ZTR brand http://www.themojack.com/products/accessories/hitch-multi-use-hitch.
PAGE 2
Lawn Tractor Hitch Assembly Install 701-0008 Hitch Support Weldment under tractor hitch plate - Secure using (1) 0030063 M12 x 40mm screw and (1) 002-0002 M12 Nut Install 701-0002 Multi Hitch Weldment on top of tractor hitch plate ZTR Hitch Assembly Tube Type without Factory hitch mount Using (1) 003-0062 M10 x 25 Carriage Screw and (1) 0020001 M10 Nut, install 7010013 Pivot Bracket Weldment on the opposite side of the tractor from the transmission main housing Determine which side of the mower the tran
PAGE 3
Customer Service Phone: 1-877-575-3173. www.themojack.
PAGE 4
Tool Carrier Assembly Instructions The Tool Carrier Accessory is to be used with the Multi-Use Hitch mount ONLY and is SOLD SEPARATELY. 1. Assemble (2) Vertical Supports to Base Frame using (8) M8 X 16 Screws. 2. Assemble (2) Upper Frames to Vertical Supports using (8) M8 X 16 Screws 4. Assemble (2) Lift Handles to Vertical Supports using (4) M8 Locknuts. 5. Assemble Support Tube to Base Frame using (2) Hitch Pins and (2) Hair Pins 6.