BrightVR Stream Model – User Manual User Manual LiveStream Model www.mog-technologies.com Reviewed on 27-12-2017 by maria.joao.matos@mog-technologies.
BrightVR Stream Model – User Manual | Index | Index ................................................................................................................................................................. 2 ............................................................................................................................................................................. 3 1. INTRODUCTION .......................................................................................................
BrightVR Stream Model – User Manual 1. Introduction 1.1 Overview Congratulations on the acquisition of your new BrightVR 360 camera and welcome to MOG Technologies world! With BrightVR Stream 360 Camera you can easily capture your 360 contents with a 4K output resolution taking advantage of its instant automatic capture, stitch and broadcast feature set. With BrightVR you can live stream your 360 content without the need of any other media encoding hardware.
BrightVR Stream Model – User Manual 1.3 Camera Safety and Handling Instructions ▪ Please check if you have all the camera components available and if they are operating normally before using it; ▪ Only use power sources and accessories approved to use with this product; ▪ Be careful when carrying the camera.
BrightVR Stream Model – User Manual 1.4 Battery Safety and Handling Instructions ▪ Only use batteries approved to use in this product and don’t use modified or homemade batteries ▪ Do not disassemble, modify or short-circuit the batteries.
BrightVR Stream Model – User Manual 2. The Basics 2.1 Package Contents Please check that all items described below were delivered with your order: www.mog-technologies.com 1. Watertight Box 2. BrightVR 360 Camera 3. Battery Module 4. Battery Cells (2 units) 5. 32 GB SD Card 6. Wi-Fi Antenna 7. Power Adapter 8. Tripod Adapter 9.
BrightVR Stream Model – User Manual 2.2 Getting to know your Camera 2.2.
BrightVR Stream Model – User Manual LED Indicator/Colour Status Description Fixed White The camera is ON Blinking White The camera battery is Low 2.2.3 Indicator Lights and Display on battery module The LCD and light indicators of the battery module provide information about the camera operating mode and status. The following table displays the different status possible and the corresponding operating mode. 1. Power Status Light 2.
BrightVR Stream Model – User Manual 2.3 Initial SETUP 2.3.1 Connecting the WIFI Antenna 1. Turn OFF the Camera 1. Insert the Wi-Fi antenna into the socket and screw it until it is securely attached to the camera (no tools are required for this procedure). 2.3.2 Inserting and removing a Memory Card BrightVR camera comes with a 32 GB capacity memory card. A memory card must be inserted in the camera slot to record videos or save your photos.
BrightVR Stream Model – User Manual Inserting Batteries Battery Slot Battery Slot \ ight Batteries Compartment Cover (Open) (+) 1. Turn the camera OFF; 2. Open the battery compartment cover; 3. Insert the batteries into the slots (Ensure the batteries are inserted in the correct orientation. Please check image for info). 1. Once both batteries are inserted, close the battery compartment cover. Removing batteries 1. Turn the camera OFF; 2. Open the battery compartment cover; 3.
BrightVR Stream Model – User Manual 2. Push the battery module until it is closely coupled to the camera. 3. Tighten the screw to lock the battery module to the camera. Camera Connection 2.4 Starting UP 2.4.1 Powering ON / OFF BrightVR Camera will operate from batteries and when plugged to the AC adapter or plugged to remote box/cable. Powering On 3SECONDS Press and hold down the Power/Mode button for about 3 seconds to turn ON the camera.
BrightVR Stream Model – User Manual Press 0:00:00 Press You can change the shooting mode pressing the Power/Mode button. - Recording Mode - Photo Mode LIVE Live Streaming Mode Press “Setting button” (depending on the shooting mode selected) to start recording a video, to starting a live streaming or to take a photo. After your confirmation, the shooting status light will start blinking.
BrightVR Stream Model – User Manual After the camera access to the network, you can configure and control the camera remotely using the BrightVR App installed in your smartphone/tablet (see chapter 4. BrightVR App). If the network has internet access you will be able to perform Live Streaming to outside of you network (e.g. Youtube, OTT platform, etc.). 3.1 Ethernet (Cable) Use an Ethernet cable to connect your camera to a local area network (LAN).
BrightVR Stream Model – User Manual 4. BrightVR App 4.1 For iOS or Android System The camera can be controlled through battery module buttons (Basic Camera Operation) or remotely using the BrightVR APP provided there is a network connection between the camera and the smartphone/tablet.
BrightVR Stream Model – User Manual You can also find the App in the Apple Store by searching for: BrightVR. Make sure you have downloaded and installed the APP firstly then see below. The BrightVR APP interface is as shown in the picture. www.mog-technologies.
BrightVR Stream Model – User Manual 4.2 Connecting to the Camera 1. Turn on the camera 2. Open the BrightVR APP and tap on “Connect to the camera”. You will see a list of nearby WIFI networks. 3. You will be prompted to connect to your camera WIFI network. Select and connect to your camera WIFI network (see Camera as a WIFI hotspot / Access Point). 4. Once connected you can start controlling and configure your camera. 1. 2. 4. 3.
BrightVR Stream Model – User Manual 4.3 Home Page Menu Prepare your camera to start recording video or take photos. Recording Camera Modes Photo Mode Video recording Mode Prepare your camera to perform a live streaming video and if required to record the transmission. RTMP YOUTUBE Preview your videos and photos. There is four views for preview: Fisheye, Little Planet, VR and Panoramic/Normal. Configure and verify your camera settings.
BrightVR Stream Model – User Manual Camera Settings Menu Choose the format: 2k or 4k Back Button Photo Mode; Video recording Mode Shutter Button -Start/Stop Recordings, Capture Photos ALBUM Viewer You can display a desired area of a spherical image taken with the camera and zoom in or out to check details in the image. The screens below are used as examples in the following descriptions. Zooming in or out: Pinch out, pinch in Changing the displayed area: Swipe or flick www.mog-technologies.
BrightVR Stream Model – User Manual 4.3.1.1 Photo Mode Assuming you are already connected to your camera using de BrightVR App (Connecting to the Camera): 1. With BrightVR App open tap on the “CAMERA”; 2. Select the pretended resolution to take photos, 2K or 4K (on top of the application); 3. To select photo mode, tap on ; 4. Tap on “CAPTURE” Button to take a photo 4.3.1.
BrightVR Stream Model – User Manual 4.3.1.3 Live Streaming – CABLE and Wi-Fi connection The camera can live stream through different video distribution platforms (e.g. YouTube, using RTMP). Assuming you are already connected to your camera using de BrightVR App (Connecting to the Camera): 1. Select the network connection that you will use to perform the Live Streaming “CABLE or Wi-Fi”. 1.1. If the option was “CABLE”, tap “GO Live” to proceed 1.2.
BrightVR Stream Model – User Manual Note: If you want to record the live transmission, select the option “Record to SD Card”; 3. Choose your Push address option: 3.1. “RTMP” option: i. Introduces the RTMP address (RTMP://address), and tap on “Confirm Changes”; ii. And finally, to start the Live Streaming tap on “LIVE”. 3.2. “YouTube” option: i. Link your YouTube account; Note that you previously must configure a live event on your YouTube Channel and don´t forget to able the video 360º option; www.
BrightVR Stream Model – User Manual ii. Introduces your YouTube live channel settings (Title, Introduction, Start time and End time), and tap on “Confirm Changes”; iii. And finally, to start the Live Streaming tap on “LIVE”. 4.3.2 Album Select the Album button to access all your videos and photos capture in 2k mode. Selecting the arrow, you can choose between photos or videos www.mog-technologies.
BrightVR Stream Model – User Manual Clicking on the photos/videos the App will automatically redirect you to Camera www.mog-technologies.
BrightVR Stream Model – User Manual 4.3.3 Settings Information about Network (IP address; Submet Mask; mac address) and Storage Add another logo. You can choose a file from your phone ??? You can define the SSID and password of your camera Wi-Fi. Define the video frame rate; Select 4k Recording Bitrate; Video Orientation and Video Max Fragment Duration To add or edit logo Configuration of your Push Address or YouTube account Information about; MOG; APP and Firmware User Manual 4.3.
BrightVR Stream Model – User Manual FCC ID:2ARZN-BRIGHTVR This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.