Specification Sheet

Tank Levers are constructed of zinc.
 YB5101BN – Decorative Tank
Lever
Brushed Nickel Finish
 YB5101CH – Decorative Tank
Lever
Chrome Finish
 YB5101ORB – Decorative
Tank Lever
Oil Rubbed Bronze Finish
Cleaning Instructions:
25300 AL MOEN D RI VE  N OR TH OLMSTED , OH 44070
C OR POR ATE H EADQUAR TER S: (800) 321 -8809  F AX: [phone]
I N TER N ATI ON AL: (440) 962 -2000  F AX: [phone]
C U STOMER SER VI C E (U SA): 800 -882-0116  F AX: [phone]
W W W . MOEN . C OM
Copyright Creative Specialties International Literature #BA1618
1. Remove existing tank lever.
2. Remove the arm mechanism from the new tank lever by loosening nut.
3. Unscrew the tank nut. The thread for the tank nut is a left handed thread.
4. Position the new tank lever through the tank hole. The tank lever handle
should be pointing aw ay from the toilet bow l.
5. Tighten nut. Depending on the curvature of the tank, there might be a slight
hap betw een the outside of the tank and the base of the lever.
6. Place the arm mechanism of the tank lever post. Adjust the arm up or dow n
as needed. Tighten nut to secure the arm in place.
7. Adjust the arm mechanism from side to side as needed. Make sure the arm
does not come into contact w ith the tank w all or the flush mechanism.
Tighten screw (A) to lock the arm in place.
8. Attach the flapper valve chain to one of the provided slots on the arm. Be
sure to eliminate any slack in the chain.
9. Make sure no w ater is leaking through the flapper w hen the handle is in its
normal position (not flushing). If it is, adjust the arm as needed.
Stock Number:______________________Tank Lever
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Decorative Tank Lever
YB5101
Voss™ Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.