Technical Specifications

Towel Ring
is constructed of zinc.
q
DN1086CH
–
Towel Ring
Chrome Finish
q DN1086NLBN – Towel Ring
Brushed Nickel & Polished Nickel
Finish
Cleaning Instructions:
1.
Place metal bracket at desired position on the wall, large slots to be
top and bottom and small holes to be right and left.
2. One at a time, place each anchor screw through the
bracket, centered
in the large hole. Using a Phillips screwdriver, turn the anchor screw
while applying pressure. Screw will self drill and tap into drywall.
3. Do not over tighten.
4. Place the post with the setscrew down, over mounting bracket.
Tighten the setscrew at the bottom of the base.
Stock Number:
______________________Towel Ring
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Towel Ring
DN1086
Reed™ Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
25300 AL MOEN DRIVE
•
NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: (800) 321- 8809 • FAX: [phone]
INTERNATIONAL: (440) 962- 2000 • FAX: [phone]
CUSTOMER SERVICE (USA): 800- 882-0116 • FAX: [phone]

Copyright Creative Specialties International 2003 Literature #BA1180