Specifications

ManualsBrandsMoen ManualsBathroom Remodel & Bathroom Fixtures90 Degree Single-Handle Vessel Sink Bathroom Faucet

CRITICAL DIMENSIONS

(DO NOT SCALE)

Spec i fi ca tions

FOR MORE INFORMATION CALL: 1-800-465-6130

www.moen.com

90 DEGREE™

Single-Handle Vessel Lavatory Faucet

Model: S6711

NOTE: THIS FAUCET IS DESIGNED TO BE

IN STALLED THROUGH 1 HOLE, 1-1/8” MIN. DIA.

1-11/16”

(43mm)

11-11/16”

(296mm)

4-1/4”

(108mm)

9-1/8”

(232mm)

12-11/16”

(321mm)

18”

(458mm)

2-1/2"

(80mm)

MAX.

2-3/16”

(56mm)

Lift

Rod

DESCRIPTION

• Metal construction with various finishes identified by suffix

• Flexible supply lines with 3/8” compression fittings

OPERATION

• Lever style handle

• Temperature controlled by 100° arc of handle travel

FLOW

• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi

CARTRIDGE

• 1255™ Duralast™ cartridge for Single-Handle Faucets

STANDARDS

• Third party certied to WaterSense,® ASME A112.18.1/CSA B125.1,

and all applicable requirements referenced therein

• Certied to NSF 61/9 & 372

• Third party certified to comply with WaterSense® High Efficiency

Bathroom Sink Faucet Specification

• Complies with California Proposition 65 and with

the Federal Safe Drinking Water Act

• ADA for lever handle

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects to

the original homeowner

• 10 year limited warranty when used in a multifamily installation

• 5 year limited warranty when used in a commercial installation

Visit www.moen.com/support for complete details and limitations

Rev. 12/18

There is more than one version of this model.

Page down to identify the version you have.

Summary of content (3 pages)

PAGE 1
S p e cif ic at i o n s There is more than one version of this model. Page down to identify the version you have. DESCRIPTION • Metal construction with various finishes identified by suffix • Flexible supply lines with 3/8” compression fittings OPERATION • Lever style handle • Temperature controlled by 100° arc of handle travel FLOW • Flow is limited to 1.5 gpm max (5.
PAGE 2
S p e cif ic at i o n s DESCRIPTION • Metal construction with various finishes identified by suffix • Flexible supply lines with 3/8” compression fittings OPERATION • Lever style handle • Temperature controlled by 100° arc of handle travel FLOW • Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi CARTRIDGE • 1255™ Duralast™ cartridge for Single-Handle Faucets STANDARDS • Third party certified to WaterSense,® ASME A112.18.1/CSA B125.
PAGE 3
S p e cif ic at i o n s DESCRIPTION • Metal construction with various finishes identified by suffix • Flexible supply lines with 3/8” compression fittings OPERATION • Lever style handle • Temperature controlled by 100° arc of handle travel FLOW • Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi CARTRIDGE • 1255™ Duralast™ cartridge for Single-Handle Faucets STANDARDS • Third party certified to WaterSense,® ASME A112.18.1/CSA B125.