Specification Sheet

FEATURES
• Fine fireclay construction
• Sink is finished on all four sides
• 3-1/2” center drain
• Stainless steel bottom sink rack and chrome strainer included
• Requires an additional flange if using a garbage disposal
(not included)
• Requires support frame in cabinetry
STANDARD COLORS
• White (001)
NOMINAL DIMENSIONS
• 33”X19”X10”
BOWL INSIDE DIMENSIONS
• 31 1/2” (800mm) wide
• 17 1/2” (444mm) front to back
• 8 7/8” (226mm) depth
COMPONENTS INCLUDED THE BOX
• 2300 0004 - 31 1/2”X17 1/2”
• SS SINK RACK - CHROME (1pc)
• 2330 0001 - SINK STRAINER - CHROME (1pc)
COMPLIANCE CERTIFICATIONS
• Meet or Exceeds ASME A112.19.2 / CSA B45.1
3/4"
[19mm]
8 7/8"
[226mm]
32 7/8"
[834mm]
10"
[254mm]
R3/8 "
[R8mm]
R3/4 "
[R20mm]
33"
[838mm]
31 1/2"
[800mm]
17 1/2"
[444mm]
19"
[482mm]
9 1/2"
[241mm]
9 1/2"
[241mm]
Ø3 1/2"
[Ø90mm]
Model
Number
FC331910 10" Center
Depth-
Inches
Faucet
Holes
Drain
Placement
N/A
CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
11/20
Apron Front Single
Bowl Kitchen Sink
NOTES: Refer to installation instructions supplied with kitchen sink for undermount, countertop or above counter custom installations.
Due to the reclay process, dimensions may vary. Please use the actual sink that you will be installing in order to determine the cutout dimensions for
your countertop.
CAUTION: Sink is heavy! Installer must provide adequate reinforcement for all load-bearing supports in
accordance with installation instructions supplied with kitchen sink.
Fittings not included with xture and must be ordered separately.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerance established by ANSI standards. These measurements are subject to
change or cancellation. No responsibility is assumed for use of superseded or voided pages.