Specification Sheet

Towel Ring
post is die cast from
highest quality zinc alloy (zamac).
Castings are triple plated with a
polished brass, polished chrome, or
matte pewter finish.
q
DN8486PB
–
Towel Ring
Polished Brass Finish
Concealed Screw Mounting
q DN8486CH – Towel Ring
Polished Chrome Finish
Concealed Screw Mounting
q DN8486MPW – Towel Ring
Matte Pewter Finish
Concealed Screw Mounting
Cleaning Instructions:
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070 [phone] •
FAX: [phone] • INTERNATIONAL: (440) 962- 2000 •
FAX: (440) 962
-
2726 CUSTOMER SERVIC
E (USA): 800
-
882
-
0116
1.
Position the mounting plate on the wall at desired location with “UP”
facing you.
2. One at a time, place each anchor screw through the mounting plate,
centered in each large hole. Using a Phillips screwdriver, turn the anchor
screw while applying pressure. Screw will self drill and tap into drywall.
Do not over tighten.
3. Place assembly over the mounting post, setscrew facing down.
4. Tighten setscrew.
Stock Number:
______________________Towel Ring
By CSI Bath Furnishings
Materials:
Installation Ins
tructions:
Stock Numbers:
Dimensions:
Towel Ring
DN8486
Preston Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.

Copyright CSI Bath Furnishing Division of Moen 02/22/01
Literature #BA1050