Technical Specifications

prim
Double Towel Bar post is die cast
from the highest quality zinc alloy
(Zamac). Casting is plated in chrome,
brushed nickel or oil rubbed bronze.
Towel bar is aluminum for brushed
nickel and chrome finishes and brass
for oil rubbed bronze.
 DN3622BN – 24” Double Towel Bar
Brushed Nickel
 DN3622CH – 24” Double Towel Bar
Chrome Finish
 DN3622ORB – 24” Double Towel
Bar
Oil Rubbed Bronze
Cleaning Instructions:
Stock Number:_____________________24” Double Towel
Bar By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
24” Double Towel Bar
DN3622
Bradshaw™ Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
25300 AL MOEN DRIVE  N ORTH OLMSTED, OH 44070
C OR PORATE HEADQUARTER S: (800) 321 -8809  F AX: [phone]
I NTERNATIONAL: (440) 962 -2000  F AX: [phone]
C U STOMER SERVICE (U SA): 800 -882-0116  F AX: [phone]
W W W.MOEN . C OM
Copyright Creative Specialties International Literature #BA1511
1. Position the mounting template on the w all in the desired location.
2. Using a level, align the template and tape it to the w all.
3. Drill tw o 5/16” holes at each mounting post location that corresponds to your
product.
4. Remove the template from the w all.
5. Fold ends of the plastic toggle together and insert into each hole in the w all.
6. Lightly tap anchors until flush w ith the w all.
7. One at a time, insert plastic pin into each of the anchors and lightly tap to
activate anchor. Remove pin and repeat on all anchors.
8. Remove mounting posts from the product assemblies by loosening each
setscrew .
9. Place the mounting plate on the w all over the installed w all anchors w ith “UP”
facing you.
10. Insert screw s through the mounting plate into the anchors. Tighten the
screw s.
11. Assemble the towel bar and posts.
12. While assembled, position each end post w ith setscrew s facing dow n and
place over both mounting posts. Tighten the setscrew at the bottom of each
post.