Dimensions Guide

Towel Bars are die cast from highest
quality zinc alloy (zamac) or injection
molded with plastic. Castings are
triple plated with a polished brass or
polished chrome finish. Bar is
polished aluminum.
 910 – Towel Bar Posts (Pair)
Polished Chrome Finish, 5/8” Square
 910A18 – 18” Towel Bar
Polished Chrome Finish, Metal Body, 5/8”
Square Bar, Exposed Screw Mounting
 25818A - 18” Bar Only
Polished Chrome Finish, 5/8” Square
 910A24 – 24” Towel Bar
Polished Chrome Finish, Metal Body, 5/8”
Square Bar, Exposed Screw Mounting
 25824A - 24” Bar Only
Polished Chrome Finish, 5/8” Square
Cleaning Instructions:
1. Place unit on wall in desired location.
2. Mark location of holes. Drill starter holes.
3. Attach unit to wall with 1 ½” screws (provided).
Note: Wood blocking is preferable behind all wall surfaces.
If wood blocking is not available, the following optional fasteners are
suggested: Tile/Masonry – Plastic or Lead Anchors; Plaster/Drywall –
Toggle Bolts.
Stock Number:______________________Towel Bar
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Towel Bars
910, 910A, 25818, 25824
Economy Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
25300 AL MOEN D R I VE  N OR TH OLMSTED , OH 44070
C OR POR ATE H EAD QUAR TER S: (800) 321 -8809  FAX: [phone]
I N TER N ATI ONAL: (440) 962 -2000  FAX: [phone]
C U STOMER SER VI C E (U SA): 800-882-0116  F AX: [phone]
W W W . MOEN .COM
Copyright Creative Specialties International Literature #BA1638