Specification Sheet
Single-Handle Lavatory Faucet
NOTE: This faucet is designed to be
in stalled thru 3 holes, 1" min. dia.
6"
(153mm)
7-1/8"
(181mm)
2-1/2"
(64mm)
5"
(127mm)
9-5/8"
(244mm)
7"
(178mm)
2"
(51mm)
1-3/4" Long
(44mm)
2"
(51mm)
1-1/8" MAX.
(29mm)
2-7/16"
(62mm)
HOT
COLD
55˚
55˚
DESCRIPTION
• Solid brass construction
• Chrome finish
• 1/2" IPS connections
• Solid brass waterways
• Without drain
OPERATION
• 6” lever handle w/red and blue temperature indicators
• Temperature controlled through 110˚ arc of handle
FLOW
• Aerator is limited to 2.2 gpm max (8.3 L/min)
CARTRIDGE
• 121549 ceramic disc cartridge
• Nonmetallic/nonferrous and ceramic material
STANDARDS
• Third party certified to ASME A112.18./CSA B125.1 and all applicable
requirements referenced therein
• Certified to ANSI/NSF 61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handles
WARRANTY
• Warranted for 5 years against material or manufacturing defects
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158
www.moen.com
Rev. 9/12
C O M M E R C I A L
MODEL FLOW (gpm)
8416 2.2
8416F05 0.5