Specification

Specifications
CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Pressure balancing cycle valve design with an adjustable
temperature limit stop
• 1/2" IPS connections
• Includes showerhead, arm, and flange, tub spout
OPERATION
• Lever style handle
• Handle operates counterclockwise through a 270˚ arc with off at
6 o'clock and maximum hot at the 9 o'clock position. Shut off in
clockwise direction
• Adjustable temperature limit stop to control maximum hot water
temperature
• Pressure balancing mechanism maintains selected discharge
temperature to ± 2˚
FLOW
• Showerhead is limited to 2.0 gpm (7.6 L/min), 1.5 gpm (5.7 L/min)
at 45 psi
CARTRIDGE
• 1222 cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certified to ASME A112.18.1/CSA B-125.1
and all applicable requirements referenced therein
• Meets WaterSense criteria
• Meets New York City Local Law No. 57
• ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish
defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
ASHVILLE™
Single-Handle/Tub Shower
Models: 82877 series
3-1/2"
(90 mm)
6'-6"
(1981 mm)
Nomimal
C
L
1-3/8"
(35 mm)
2-1/2" Max.
(63 mm)
1/2" (13 mm) Min. CC
5/8" (16 mm) Min. IPS
2" (51 mm) CC
1-7/8" (48 mm) IPS Max. Wall
Face of Stud
Finished Wall Line
3-1/2" (90 mm) Max.
2-1/4" (57mm) Min.
C
L
3/6" (typ) (5mm)
Plaster Ground
Floor Line
Plastic
Tub/Shower
Surround
7”
(178mm)
3-1/16”
(78mm)
2-1/2”
(63mm)
1-3/8" (35mm)
1-3/8" (35mm)
HOT
INLET
COLD
INLET
FLOOR
45" (1143mm)/
48" (1219mm)-SHOWER
32" (813mm)-TUB OR
TUB SHOWER
TUB RIM
2-1/2”
(63mm)
7“
(178mm)
THIN WALL APPLICATION
THICK WALL APPLICATION
Rev. 9/12