Dimensions Guide

FAUCET DESCRIPTION
• Brass construction with chrome plated finish
• 3/8" male compression fittings
• 4" centerset
• Vandal resistant torx head screws
• Less spout (uses S series spouts)
OPERATION
• Lever style handles with hot and cold color indicators
• Hot side clockwise (1/4) turn to open (counterclockwise to close)
• Cold side counterclockwise (1/4) turn to open (clockwise to close)
CARTRIDGE
• Brass shell, ceramic disc construction
STANDARDS
• Third party certified to meet ASME A112.18.1/CSA B-125.1,
NSF 61/9 and and all applicable specifications referenced therein
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handles
WARRANTY
• Warranted for 5 years against material or manufacturing defects
Two-Handle Wall-Mount Bar Faucet
without Spout
Model: 8286
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THROUGH 2 HOLES, 1" MIN. DIA. AND 4" ON CENTER
1”
(25mm)
ESCUTCHEON
6-1/4” x 2-1/4”
(159mm x 57mm)
9-3/8”
(238mm)
6-1/4”
(159mm)
4”
(102mm)
2-3/4”
(70mm)
2-1/2”
(64mm)
Rev. 2/12
MOEN SPECIFIER SER VIC ES 1-800-321-8809 Ext. 2158
www.moencommercial.com
S p e c i f i c a t i o n s
C O M M E R C I A L
CRITICAL DIMENSIONS
(DO NOT SCALE)