Specification

6-1/2”
(165mm)
15-1/2”
(394mm)
5-1/2”
(140mm)
8-1/4”
(210mm)
2-1/2” Max
Deck Thickness
2-3/4”
(70mm)
2-3/4”
(70mm)
2-5/16”
(58mm)
7-7/8”
(199mm)
2-3/16”
(56mm)
1/2”
(13mm)
29-1/2”
(750mm)
10-1/4" x 2-3/8"
(260mm x 60mm)
ESCUTCHEON
BRANTFORD™
Single Handle High Arc
Pulldown Kitchen Faucet
Models: 7185 series
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 1 OR 3 HOLES, 1-1/2” (38mm) MIN. DIA.
Specifications
TO ORDER PARTS CALL: 1-800-BUY-MOEN
www.moen.com
FAUCET DESCRIPTION
Reflex™ pulldown system offers smooth operation, easy movement and
secure docking
Metal construction with various finishes identified by suffix
Hydrolock® quick connect installation
Pullout spray with 68" braided hose
Flexible supply lines with 3/8" compression fittings
High arc spout provides height and reach to fill or clean large
pots while pull out wand provides the maneuverability for cleaning or rinsing
360˚ rotating spout provides ability to install handle on either side
OPERATION
Lever style handle
Temperature controlled by 100˚ arc of handle travel
Operates with less than 5 lbs. of force
Operates in stream or spray mode in the pullout or retracted position
When filling a vessel outside the sink, the pause feature conveniently stops
the flow of water as the wand passes over the counter top
FLOW
Flow is limited to 2.2. gpm (8.3 L/min) at 60 psi
CARTRIDGE
1255™ Duralast™ cartridge for Single-Handle Faucets
STANDARDS
Third party certified to ASME A112.18.1/CSA B125.1 and all applicable
requirements referenced therein including NSF 61/9
Complies with California Proposition 65 and with the Federal Safe Drinking
Water Act
The backflow protection system in the device consists of two independently
operating check valves, a primary and a secondary which prevent backflow
ADA for lever handle
WARRANTY
Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
5 year warranty if used in commercial installations
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 3/11

Summary of content (1 pages)