METAL EFFECTS ® patina GREEN PATINA FINISH INSTRUCTIONAL PAMPHLET ACABADO DE PÁTINA VERDE FOLLETO INSTRUCTIVO
PROJECT SUPPLIES CHECKLIST INCLUDED IN KIT Metal Effect Green Patina Finish system • Instructional Pamphlet • Green Patina Aging Solution • Metal Effects Primer • Chip Brushes • Oxidizing Copper Paint • Stir Sticks NOT INCLUDED IN KIT Other items needed: • Drop Cloths • Painter’s Tape (if needed) E NGLI S H GATHER YOUR TOOLS AND SUPPLIES Collect supplies needed for your project using the Project Supplies Checklist below.
PRIMING Metal Effects Primer can be applied to clean metal, wood, masonry, plaster and previously painted surfaces. Stir well before use with the stir stick provided. Apply 2 coats (wait approx. ½ hour between coats) of Metal Effects Primer with the chip brush supplied. DO NOT THIN! Allow primer to dry (approx. 12 hours). APPLICATION Stir Oxidizing Copper Paint well before use with the stir stick provided. Apply first coat with the chip brush supplied and let dry (approx. 1/2 hour).
PREPARACIÓN DE LA SUPERFICIE Para obtener mejores resultados, la superficie del proyecto debe estar firme, limpia y seca antes de aplicar la pintura base. Retire toda la pintura suelta y descascarada. Lije las superficies brillantes. LISTA DE VERIFICACIÓN DE MATERIALES PARA EL PROYECTO APLICACIÓN DE LA PINTURA BASE La pintura base Metal Effects se puede aplicar a metal limpio, madera, albañilería, yeso y superficies previamente pintadas.
MANIPULACIÓN Y ALMACENAMIENTO Para evitar desprendimiento, cierre el envase después de cada uso. Mantenga la tapa firmemente cerrada durante el almacenamiento. Proteja del congelamiento. Si el contenido se congela, descongele a temperatura ambiente antes de usar. Mezcle bien antes de usar. No aplique a temperaturas inferiores a los 55 ˚F / 13 ˚C. Elimine el producto no utilizado o no deseado de acuerdo con las reglamentaciones locales que regulan los recubrimientos a base de agua.