Installation Guide

www.modernforms.com

Modern Forms retains the right to modify the design of our products at any time as part of the company’s continuous improvement program.

F-1811-LED

INSTALLATION INSTRUCTIONS

TABLE OF CONTENTS

1. Safety Rules

2. Package Contents

3. Installation Instructions

1. SAFETY RULES

For operation, maintenance, and troubleshooting information, visit

modernforms.com/help.

1. To prevent electrical shock, ensure electricity has been turned o

at the circuit breaker before beginning.

2. All wiring must be in accordance with the National Electrical Code

“ANSI/NFPA 70” and local electrical codes. Electrical installation

should be performed by a licensed electrician.

3. The fan must be mounted with a minimum of 7 ft (2.1 m) clearance

from the fan blades to the oor and a minimum of 1.5 ft (0.5 m)

from the edge of the fan blades to the surrounding walls.

4. The outlet box and support structure must be securely mounted

and capable of reliably supporting a minimum of 35 lbs (15.9 kg).

Use only UL/cUL listed outlet boxes marked “FOR FAN SUPPORT”

Use only the screws and washers provided with the outlet box.

WARNING: Do not install or use if any part(s) is/are damaged or

missing. This product is designed for use only with the supplied

parts and/or accessories designated for use with this product by

Modern Forms. Substitution of parts or accessories not designated

for use with this product by Modern Forms could result in personal

injury or property damage and will void the warranty. Contact an

authorized dealer or the manufacturer if any parts are damaged or

missing.

WARNING: Before assembling, refer to the “Making the Electrical

Connections” section in your fan’s installation instructions. If you

feel you do not have enough wiring knowledge or experience, have

your fan installed by a licensed electrician.

WARNING: Do not use power tools to assemble or install your

fan. Using power tools can result in improper assembly which can

lead to noise or fan damage, personal injury or property damage.

2. PACKAGE CONTENTS

Glass – Etched OpalAdapter Plate (light kit plate) 4 in LED Engine Hardware Bag

5/32”x5mm Phil/Slotted Truss

Head Screw *4

A B C

PAGE 1
F- 1 8 1 1 - L E D INSTALLATION INSTRUCTIONS TABLE OF CONTENTS 1. 2. 3. WARNING: Do not install or use if any part(s) is/are damaged or missing. This product is designed for use only with the supplied parts and/or accessories designated for use with this product by Modern Forms. Substitution of parts or accessories not designated for use with this product by Modern Forms could result in personal injury or property damage and will void the warranty.
PAGE 2
F- 1 8 1 1 - L E D INSTALLATION INSTRUCTIONS UNINSTALLING THE DECORATIVE LOWER CAP INSTALLING THE LED LUMINAIRE MODULE Remember to : disconnect the power at the circuit breaker. 1. 1. 2. Unthread and remove the decorative lower cap from the motor assembly (FIG. 1). Remove the 3 screws from the wire housing lower cover and keep them for use with the light kit adapter plate. Remove the wire housing lower cover. 2. 3.