Wireless Undercabinet TV/DVD/Music System User’s Guide for Model IKTD1016 v1620-01 For the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
Table of Contents Setup ���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 5 Features & Specifications Includes Power Battery Backup Orientation ���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 6 Front Controls Side Inputs Rem
Setup Features & Specifications Includes • Bluetooth wireless • Remote control • Wireless range: 60 feet • AC/DC power adapter • 10" swivel TFT LCD display: 1024 x 600 resolution • Wall-mount hardware and instructions • ATSC tuner • User's guide • DVD player: DVD, DVD±R/RW • CD player: CD, CD-R/RW, JPEG CD • Built-in microphone for handsfree speakerphone • Digital FM radio (PLL) • Station memory presets (20 FM) • Negative LCD display with white backlight • Audio/Video Inputs: HDMI, Composite, 3.
Orientation Front Controls Channel ±/ Memory Presets Power Remote Sensor Display Timer Source Volume ± Disc Tray Pair/Play/Pause/ Speakerphone Skip/ Tune Stop/USB/ End Call Memory Open/ Close Disc Tray Microphone Side Inputs Stereo Inputs Line In 6 HDMI Input Composite Video Input DC Power Input USB Port Screen Latch
Remote Remote Functions Power Press to power the television off or on. Open/Close Open or close the disc tray. Channel +/ − Press to adjust the television channel. Subtitle Press to select subtitle language. Volume +/ − Press to adjust the television volume. Mute Press to mute the volume. OK/Arrows Press to make selections in the on screen menus. Menu Press to access the loaded DVD’s menu. GoTo/Number Keypad Press to enter channel numbers, DVD chapters/scenes, etc.
Audio Inputs Connecting Cable/TV Antenna You will need a cable/antenna wire (not included). 1. Connect the Cable/Antenna wire to the input on the rear of the unit. 2. Press the Source button to switch to tV. 3. Press the Setup button to access the setup menu. 4. Using the Arrow Keys on the remote, select Search and press OK. 5. Select Auto Search to begin scanning for available channels.
Connecting Cable/TV Antenna - Detail Stereo RCA Inputs (Aux In) - Detail Connecting HDMI - Detail HDMI 9
Other Devices Using a USB Drive 1. Load a USB drive into the USB Port on the side of the unit. 2. Press the Source button to switch to DVD. 3. Press and hold the USB button on the unit or press the USB button on the remote to switch to USB. 4. Use the Arrow/OK buttons to select and play content from the connected USB drive. Line In (3.5mm Audio Input) You will need a 3.5 mm audio input cable (not included). 10 1. Connect a 3.
Using a USB Drive - Detail Line In - Detail 11
Bluetooth Wireless Pairing to a Device & Playing Audio After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the device. If your device should become unpaired or you find it is unable to connect, repeat the steps listed here. (Bluetooth). The pairing indicator on 1. Power the unit on and press the Source button to select the display will begin flashing slowly. 2. Hold the Pair button to begin pairing.
Radio Radio Reception An FM receiver is built into the unit. To improve radio reception, adjust the position of the unit. Tuning the FM Radio 1. Press the Power button to turn the under cabinet music system on. 2. Press the Source button to switch to Rd (FM Radio Mode). 3. Press the Skip/Tune buttons to tune the radio manually. Press and hold the Skip/Tune button to scan for available stations. Saving and Playing a Station as a Preset 1. Tune to the desired station. 2.
DVD & CD Note: This unit is not compatible with MP3 CDs. Loading and Playing a DVD/CD 1. Press the Source button to select DVD. 2. Press the open/close button to open the Disc Tray and place a disc into the tray, label side facing up. 3. Press the open/close button to close the Disc Tray 4. Use the controls on the remote or the unit to play, pause, adjust volume, etc. Programming a DVD or CD 14 1. While a DVD or CD is playing, press the Program button on the remote. 2.
Clock & Timer Setting the Clock 1. With the power off, press and hold the Clk Set/Mem button. The hour on the display will begin flashing. 2. Press the Skip/Tune buttons to set the hour. 3. Press the Clk Set button again, the minutes on the display will begin flashing. 4. Press the Skip/Tune buttons to set the minutes. 5. Press the Clk Set button to finish setting the time, or wait for the display to stop flashing. Setting the Timer 1.
Company Information Contact Information Website: www.iLiveElectronics.com Email Support: prodinfo@dpiinc.com Email Parts: partsinfo@dpiinc.com Phone Support: 1-888-999-4215 Warranty For Warranty Information and the most up-to-date version of this User’s Guide, go to: www.iLiveElectronics.com International Support To download this User’s Guide in English, Spanish, and French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.