MET1389 User Manual Bluetooth Blaster with FM radio
Safety Instructions & Warnings Important Safety Instructions • • • • • • • • • • • • • • 2 Read these Instructions. Keep these Instructions. Heed all Warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Battery Warnings • WARNING: Do not ingest the battery, Chemical Burn Hazard. • If the remote control supplied with this product contains a coin/button cell battery and the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. • Keep new and used batteries away from children. Iff the battery compartment does not close securely, stop using the product and keep it away from children.
Table of Contents Setup ���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 5 Features Includes Power Overview �������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 6 Speaker Front Speaker Top Controls Connecting to Other Devices �����������
Setup Features • Bluetooth Wireless - range 60 ft. Includes • AC/DC power adapter • Built-in dual speakers and subwoofer • EQ presets • USB input - up to 32GB, supports MP3 • Microphone input (1/4") • Guitar input (1/4") • Headphone Jack (1/4") • Aux In (3.
Overview Speaker Front & Rear Subwoofer Carry Handles Lights Speakers x2 6
Speaker Top Headphone Jack (1/4" Jack) Microphone Input (1/4" Jack) Aux In (3.
Overview Controls 3 1 2 4 6 7 8 5 9 10 11 8
1. Power / Source Press to power ON. Press to switch between FM and USB modes. Press and hold to power OFF. 2. +10 / Mem / Pair Press to skip 10 tracks ahead (USB MODE). Press to set radio station to a chosen Memory Preset (FM MODE). Press and hold to pair to a Bluetooth device. 3. Stop / Play / Pause / Auto Scan Press and hold to stop. Press to play, or pause audio (USB MODE). Press and hold to automatically scan FM radio frequencies and program radio presets (FM MODE). 4.
Connecting to Other Devices Pairing to a Bluetooth Device and Playing Audio Wirelessly After initial pairing to a Bluetooth device, the unit will stay paired unless unpaired manually by the user, or erased due to a reset of the device. If your device should become unpaired or you find it is unable to connect, repeat these steps. Audio played through Bluetooth will play in both FM and USB Modes. 1.
RCA Audio Output Requires RCA audio cables (red/white, not included). 1. Connect RCA stereo audio cables to the Master Output on the unit and the RCA audio inputs on an external audio system or device. 2. Adjust the external stereo system to accept input from the speaker. 3. Audio played through the speaker will now be heard through the connected stereo system. Connecting a USB Drive 1. Load a USB thumb drive into the USB Port on the speaker. 2. Press the Source button to switch to USB Mode. 3.
