Thank you for purchasing iDance Audio System PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATION THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
WHAT’S IN THE BOX Contents 1. iDance XD300 Control Panel Tower Speaker Tower Base 2. AC-DC Power Adapter 3. Instruction Manual4. Accessory OVERVIEW The iDanceXD300is a Wireless all-in-one DJ Party box System with an integrated mixer, which accepts microphone, guitar, line-in audio,and stereo Bluetooth wireless audio up to 10 meters.Only few simple steps to pair your device!! The XD300is perfect for DJ,house / pool / yard party,or for karaoke applications.
FCC and IC WARNING Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
WARNING The exclamation mark inside an equilateral to alert user of the presence of theimportantoperatingandmaintenance(servicing)instr uctions in the literature accompanying the product. WARNING: TO REDUCE THE RISK OF FIRE OR SHOCK, DO triangleisintended NOT EXPOSE THIS PRODUCT TO RAIN ORMOISTURE CAUTION RISK OF ELECTRICSHOCK DO NOT OPEN The lightning flash with arrowhead symbol inside triangle is intended to alert User of NOT REMOVE COVER OR BACK.
1. Read theseinstructions. 2. Keep theseinstructions. Heed all warnings. 3. Follow all instructions. 4. Do not use this apparatus near water. 5. Clean only with dry cloth. 6. Do not block any ventilation openings. 7. Installin accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
z z z z z z z z z z z Bluetooth wireless stereo audio streaming Support A2DP Profiles for most smart phones / laptops Aux Ininput (3.5 mm Stereo Mini Jack) Audio Out output (RCA Jack) Microphone Input (1/4" Jack) x 2 pcs Control Panel with Disco light effect. Speaker Tower with Disco light effect 8 Key for Jingle Pitch sound effect 6.5" Full range speaker X 2pcs + 1.5" Tweeter USB jack for mobile battery charging Power Adapter ( Included ) for main power operation CONTENTS WHAT’S IN THE BOX . . . . . . .
CONTROL LOCATION 1.
1. DEVICE CRADLE Place laptops or mobile 2. MIC IN (1/4” Jack) Input Jack 6.3mm unbalanced jack for connect microphone. 3. USB Jack ( Support 5V , 1A) Connect USB jack for laptops or mobile battery charging 4. AUX IN ( Line In / Audio Input) Input Jack Connect a music device (MP3 player etc.) to this socket with a 3.5mm audio cable. The external device will sound from XD300 speaker. 5. ECHO Knob Turn to adjust the echo sound effect when microphone connected. 6.
15. LIGHT SHOW Indicator Indicator for different light show mode ( on / off / strobe ). 16. Jingle Pads X 8 You may press this 8 buttons to mix the pre stored jingle sound to your music, and you may also adjust the pitch and tempo in real time by turning the jingle pitch knob. 17. DISCO BALL Different color LED light show. 18. MIC Holder x 2 pcs Place the microphone onto the holder. 19. LED Light Show Panel Show LED disco light show. 20. MIC 2 (1/4” Jack) Input Jack 6.
Connect small end of adapter to main unit and plug the supplied adapter into standardAC wall socket.Press theSTDBYbuttonto turn on power. Press again turn unit to standby. Notes: If the adapter does not fit properly, turn it over and again. Do not force AC plug. Remove the power adapter when the unit not operation or unused for long periods of the time. Connecting Bluetooth to your Smartphone I Tablet 1.
PANEL & TOWER INSTALLATION 10
A / B CONNECTION Use the cable to connect the panel and tower follow below picture. 1. 2. 3. 4. 5. 6. Install the panel on the tower ( Following previous page) Find the included cable from your box Panel B position - Connect a 3.5mm jack( included). Panel A position - Connect 5.5mm jack ( included). Tower B position - Connect other 3.5mm jack ( included). Tower A position - Connect other 5.5mm jack ( included). Notes: Don’t put the adapter DC jack to A or B position.
TROUBESHOOTING If you have followed the instructions and are having difficulty operating the unit, locate the PROBLEM in the left column below. Check the corresponding POSSIBLE CAUSE AND SOLUTION column to locate and fix the problem. PROBLEM POSSIBLE CAUSE AND SOLUTION Noise on speaker output whenmicrophone is connected and turn on XD300 Make sure your microphone or microphone cable is in good condition, grounded and shielded.