User's Manual

ManualsBrandsModel ManualsElectronics802.11a/b/g/n/ac (2.4 / 5 GHz) Wi-Fi radio + BT Radio Module

OEM Installation Guidance Document

For HP SNPRC-1950

FCC ID: B94SNPRC1950; IC: 466S-SNPRC1950

Conditions on using HP regulatory approvals:

A. Customer must ensure that its product (the “Brand-Name-Product”) is electrically

identical to REALTEK’s reference designs. Customer acknowledges that any

modifications to REALTEK’s reference designs may invalidate regulatory approvals in

relation to the customer product, or may necessitate notifications to the relevant

regulatory authorities.

B. Customer is responsible for ensuring that antennas used with the product are of

the same type, with same or lower gains as approved and providing antenna reports to

REALTEK.

C. Customer is responsible for regression testing to accommodate changes to

REALTEK’s reference designs, new antennas, and portable RF exposure safety

testing/approvals.

D. Appropriate labels must be affixed to the customer Product that complies with

applicable regulations in all respects.

E. The REALTEK radio is approved as a client/slave device; to ensure compliance with

local regulations, the device should be set to the country domain in which the access

point is installed.

F. A user’s manual or instruction manual must be included with the customer product that

contains the text as required by applicable law. Without limitation of the foregoing, an

example (for illustration purposes only) of possible text to include is set forth below:

Summary of content (6 pages)

PAGE 1
OEM Installation Guidance Document For HP SNPRC-1950 FCC ID: B94SNPRC1950; IC: 466S-SNPRC1950 Conditions on using HP regulatory approvals: A. Customer must ensure that its product (the “Brand-Name-Product”) is electrically identical to REALTEK’s reference designs. Customer acknowledges that any modifications to REALTEK’s reference designs may invalidate regulatory approvals in relation to the customer product, or may necessitate notifications to the relevant regulatory authorities. B.
PAGE 2
1. USA—Federal Communications Commission (FCC) FCC COMPLIANCE STATEMENT: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. INFORMATION TO USER: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules.
PAGE 3
    The final system integrator must ensure there is no instruction provided in the user manual or customer documentation indicating how to install or remove the transmitter module except such device has implemented two-ways authentication between the module and the host system. The final host manual shall include the following regulatory statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules.
PAGE 4
French: Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s). L‘utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.
PAGE 5
This transmitter module is tested as a subsystem (module) and its certification does not cover the FCC Part 15 Subpart B (unintentional radiator) rule requirement applicable to the final host. The final host will still need to be reassessed for compliance to this portion of rule requirements if applicable.
PAGE 6
French: Les intégrateurs de systèmes doivent comporter une étiquette avec “Contient IC: 466S-SNPRC1950" sur le produit final. Comptes d'utilisateur d'Industrie Canada devraient être fournis en ang lais et en français, au moment où chaque produit est offert à la vente ou la location au Canada.