easytrans 900 User Manual FCC ID: 2AMI5-EASYTRANS-900 1
Please read this manual carefully before using the product and keep it carefully I. DESIGN II. BUTTONS 1.Power button: Long-press the button for 2s long to start or shut down, long-press the button for 10s to force the device to shut down. 2.Volume up/down button: Press the button to increase or decrease volume. 3.Red speech input button: Hold down the button to speak to the translation machine yourself, and then let go of your hand for translation broadcast. 4.
III. HOW TO USE 1.Network connection WiFi networking When the first start is complete, the translation machine will prompt you for WiFi connection. After selecting the WiFi that can be connected to the Internet and entering the correct password, you can use the product online. SIM card networking When there is no WiFi connection, the translation machine will begin to use the data network upon insertion of SIM card into card slot.
Dimensions:145*52.6*12.5mm Manufacturer: iFLYTEK Co., Ltd. V. SAFETY PRECAUTIONS Please read the safety precautions carefully to ensure the correct use of your translator. Do not disassemble, modify or repair the device or the battery by yourself, otherwise the warranty will be invalid. Use only iFLYTEK-approved batteries, chargers, accessories and supplies. Do not crush, throw, or puncture your device. Avoid dropping, squeezing, or bending your device. Do not use your device in a moist environment.
To fully disconnect the device from the mains, unplug the AC/DC cable from power outlet. Power adapters may become warm during normal use, and prolonged contact may cause injury. Always allow adequate ventilation around power adapters when using them. The ventilation should not be impeded by covering ventilation openings with items to avoid overheating and malfunction. Maintain a clearance of at least 10 cm around the device. The device should be used in a moderate climate.
- Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance.