MD-HPBT01_14-0244_MAN_V1_ENG.fm Page 1 Tuesday, July 8, 2014 10:25 AM MD-HPBT01 Bluetooth Stereo Headset Before using your new product, please read these instructions to prevent any damage.
MD-HPBT01_14-0244_MAN_V1_ENG.fm Page 2 Tuesday, July 8, 2014 10:25 AM Modal MD-HPBT01 Bluetooth Stereo Headset Contents Introduction ...................................................................... 2 Features............................................................................... 3 Setting up your stereo headphones......................... 6 Using your stereo headphones .................................. 6 Maintaining .....................................................................
MD-HPBT01_14-0244_MAN_V1_ENG.
MD-HPBT01_14-0244_MAN_V1_ENG.fm Page 4 Tuesday, July 8, 2014 10:25 AM Side view # Item Logo with indicator LED 2 Volume Up/Down 1 Description Indicator LED show current status of the headphones. See the LED Indicators table on page 5. Press + or – to increase or decrease the volume. 3 (power/talk) button Press to turn on your stereo headphones. If you receive a phone call, press to talk. Press to turn off your stereo headphones. 4 (play/pause) button Press to begin playback.
MD-HPBT01_14-0244_MAN_V1_ENG.
MD-HPBT01_14-0244_MAN_V1_ENG.fm Page 6 Tuesday, July 8, 2014 10:25 AM Setting up your stereo headphones Charging your stereo headphones When your stereo headphone’s battery is low, the red LED blinks. To charge your stereo headphones: • Connect the charging cable from the AC adapter to your Bluetooth stereo headphones and plug the AC adapter into a wall outlet. The red LED stays on while your stereo headphones are charging and turns blue when they are fully charged.
MD-HPBT01_14-0244_MAN_V1_ENG.fm Page 7 Tuesday, July 8, 2014 10:25 AM Pairing your stereo headphones with a Bluetooth device Your stereo headphones can store pairing information for up to 8 Bluetooth devices, such as phones and tablets. Notes: Your stereo headphones: - Range is 33 feet (10 meters). - Support easy pairing. - Prompt you by saying “Connected,” when connected. - Support a battery indicator icon on an iOS device. 1 Make sure that your Bluetooth device supports the Bluetooth V 3.
MD-HPBT01_14-0244_MAN_V1_ENG.fm Page 8 Tuesday, July 8, 2014 10:25 AM Reconnecting to a paired device When your stereo headphones are not paired to a device, the Blue and red LEDs flash rapidly. • After the headphones have been successfully paired with the cell phone or MP3 player, the headphones will automatically reconnect to the phone or MP3 player. If a device does not automatically reconnect, you may need to reselect MD-HPBT01 on your Bluetooth device.
MD-HPBT01_14-0244_MAN_V1_ENG.fm Page 9 Tuesday, July 8, 2014 10:25 AM 4 Double-click the MD-HPBT01 icon on the computer or highlight the icon and click Next. Note: If you are unable to locate the MD-HPBT01 icon, click the Search Again button. 5 If required, enter 0000 (four zeros) in the Bluetooth security code field, then click Next. 6 After the headphones have been paired, click Close. If you are using Windows XP, continue with steps 7 through 9.
MD-HPBT01_14-0244_MAN_V1_ENG.fm Page 10 Tuesday, July 8, 2014 10:25 AM Pairing with a Mac computer Note: Before you pair the headphones with the computer, make sure that the computer is Bluetooth compatible. Refer to the computer's documentation or contact the computer manufacturer for more information. If your computer is not Bluetooth compatible, install a Bluetooth USB adapter (dongle). 1 Turn on Bluetooth on the computer.
MD-HPBT01_14-0244_MAN_V1_ENG.fm Page 11 Tuesday, July 8, 2014 10:25 AM 4 Select Sound Devices, then Bluetooth Audio for both audio in and audio out. 5 Enter the Skype username as “echo123” to verify that your audio settings are correct. The “echo123” username is Skype's sound test service that can help you make sure your Bluetooth works with Skype. Using 3D Sound To enable 3D sound while listening to music, press and hold the (play/pause) button to select the next pre-set 3D sound effect.
MD-HPBT01_14-0244_MAN_V1_ENG.fm Page 12 Tuesday, July 8, 2014 10:25 AM Making a Phone Call To: Do this: Voice dial Press (power/talk) once. (Some phones might not support this feature.) Press (power/talk) twice. Press (power/talk) once. Press (power/talk) once. Redial Answer a call End a call Refuse a call Change the volume Transfer a call between connected devices While your phone is ringing, press Press + or - . Press (power/talk) twice. (play/pause).
MD-HPBT01_14-0244_MAN_V1_ENG.fm Page 13 Tuesday, July 8, 2014 10:25 AM Notes: A profile can only connect one device at a time. For example, you cannot use a phone's MP3 player and a computer's MP3 player at the same time, because both players are connected through the A2DP profile. You can connect a phone and a computer at the same time because the phone uses HSP or HFP and the computer uses A2DP. This lets you listen to music from the computer and answer phone calls at the same time.
MD-HPBT01_14-0244_MAN_V1_ENG.fm Page 14 Tuesday, July 8, 2014 10:25 AM Each ear pad is labeled with an L (for left) or an R (for right), along with an arrow. To correctly replace the ear pad, this arrow should be pointed towards the back of the headset (i.e., the headband). ; Note: For additional help, see the online instructional video at www.bestbuy.com/modal under Modal Resources.
MD-HPBT01_14-0244_MAN_V1_ENG.fm Page 15 Tuesday, July 8, 2014 10:25 AM Maintaining • Do not place the headphones near a fire. The battery may explode. • Do not drop or apply excessive force to the headphones. You may damage them. • When storing the headphones for an extended period of time, store them in a dry place and avoid extreme temperatures. • If the headphones get wet, avoid exposure to heat or an electrical current. Contact a service center or the store where you purchased the headphones.
MD-HPBT01_14-0244_MAN_V1_ENG.fm Page 16 Tuesday, July 8, 2014 10:25 AM No sound, or low sound, comes from the headphones. I cannot pair the headphones with other devices. My Bluetooth device keeps unpairing. MD-HPBT01 does not appear on my Bluetooth device selection list. 16 • The battery may be dead. Recharge the battery. • Make sure that your Bluetooth device is turned on, that Bluetooth mode is turned on, and that your stereo headphones are selected.
MD-HPBT01_14-0244_MAN_V1_ENG.fm Page 17 Tuesday, July 8, 2014 10:25 AM The sound has static or breaks up. The headphones do not control the volume. The headphones volume is low. The headphones make a long, low tone every 30 seconds. The headphones are connected to a computer, but sound is coming from the computer instead of the headphones. • If the distance between the headphones and the audio source is greater than the maximum distance (approximately 33 ft.
MD-HPBT01_14-0244_MAN_V1_ENG.fm Page 18 Tuesday, July 8, 2014 10:25 AM The headphones’ buttons do not control the audio device. The headphones’ microphone is not working. • In multi-pairing mode, some functions may be restricted depending on the devices paired to the headphones. • If you pair both a phone and an MP3 player, the device you pair last has priority. For example, if you pair a phone, then pair an MP3 player, the MP3 player controls the buttons on the headphones.
MD-HPBT01_14-0244_MAN_V1_ENG.fm Page 19 Tuesday, July 8, 2014 10:25 AM Legal notices FCC Statement This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
MD-HPBT01_14-0244_MAN_V1_ENG.fm Page 20 Tuesday, July 8, 2014 10:25 AM Department of Communications-Canada Canadian Compliance Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
MD-HPBT01_14-0244_MAN_V1_ENG.fm Page 21 Tuesday, July 8, 2014 10:25 AM One-Year Limited Warranty Modal Products (“Modal”) warrants to you, the original purchaser of this new MD-HPBT01 (“Product”), that the Product shall be free of defects in the original manufacture of the material or workmanship for one (1) year from the purchase of the Product (“Warranty Period”). This Product must be purchased from an authorized dealer of Modal brand products and packaged with this warranty statement.
MD-HPBT01_14-0244_MAN_V1_ENG.
MD-HPBT01_14-0244_MAN_V1_ENG.fm Page 23 Tuesday, July 8, 2014 10:25 AM MODAL is a trademark of Best Buy and its affiliated companies. Registered in some countries. Distributed by Bust Buy Purchasing, 7601 Penn Ave South, Richfield, Mn 55423 U.S.A. © 2014 Best Buy. All rights reserved. Made in Korea.
