User Manual

US
www.mobotix.com
Innovations - Made in Germany
The German company MOBOTIX AG is known as the leading pioneer in network camera technology and its
decentralized concept has made high-resolution video systems cost-ecient.
MOBOTIX CORP • Manhattan (NY) • Phone: 888-MOBOTIX (662 6849) • [e-mail] • Made in Germany
Security-Vision-Systems
Regulatory Notice MxDisplay+
MX-Display3-EXT
32.522-001_US_11/2015
Federal Communications Commission (FCC) and Industry Canada (IC)
Notice for MX-Display3-EXT (M/N: MxDisplay+)
(FCC ID: YYRDISPB, IC ID: 9357A-DISPB)
NOTICE:
This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2)
this device must accept any interference received, including interference that may cause undesired operation.
NOTICE:
Le présent appareil est conforme aux CNR d‘Industrie Canada applicables aux appareils radio exempts de
licence. L‘exploitation est autorisée aux deux conditions suivantes:
(1) l‘appareil ne doit pas produire de brouillage, et
(2) l‘appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d‘en
compromettre le fonctionnement.
NOTICE:
Changes or modifications made to this equipment not expressly approved by MOBOTIX AG may void the FCC
authorization to operate this equipment.
NOTICE:
This Class B digital apparatus complies with Canadian ICES-003.
NOTICE:
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
NOTE:
This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Ministry of Internal Aairs and Communications Notice for
MX-Display3-EXT
NOTICE:
• This device has been granted a designation number by Ministry of Internal Aairs and Communications.
• This device should not be modified (otherwise the granted designation number will be invalid).
MOBOTIX MxDisplay+
MX-Display3-EXT
(available in black or white)
MxDisplay+
with RFID and WiFi
for MOBOTIX Door Stations
and Video Systems