Moblie Appearance picture 1
Manufacturer:MobiWire Manufacturer trademark: Model： Oneida,Oneida Lite,Vibe 4G 2
Technical Specifications Weight: 111.9g(with battery) Size: 132.8*58.6*12.6mm Battery: 3.7V Li-ion For the network: GSM:850/900/1800/1900MHz UMTS:850/900/1900/2100MHz LTE:800/900/1800/2100/2600MHz Battery refer to the following table: Battery Battery Talk time Type Capacity Li-ion 1600mAh 2G 13hrs/ battery 3G 7hrs Standby time 330hrs Battery Manufacturer: NINGBO VEKEN BATTERY CO.
Bluetooth:2402-2480MHz (TX/RX) WIFI:2412-2472MHz (TX/RX) GPS:1575.42MHz FM:87.5MHz-108.5MHz Modulation mode： GMSK (GSM850/GSM900/DCS/PCS) 8PSK（EDGE） WCDMA Uplink:BPSK/QPSK/16QAM WCDMA Downlink:BPSK/QPSK /16QAM/64QAM LTE Uplink: BPSK/QPSK/16QAM LTE Downlink:BPSK/QPSK /16QAM/64QAM GFSK/π/4-DQPSK/ 8-DPSK (Bluetooth) BPSK/QPSK/16QAM/64QAM/DSSS/OFDM/ CCK (WIFI b/g/n/a) BPSK/QPSK (GPS) Max. Of Transmit power: GSM850/GSM900: PCL = 5, PWR = 32.5 ± 0.5 dBm DCS1800/PCS1900: PCL = 0, PWR = 29.5 ± 0.
Charge Restriction Voltage: 5V Rated Capacity：1600mAh Battery low voltage:3.6V Operating Relativity Humidity Range：≦75% charger model：A31-25132-500550EU manufacturer：Aohai mode2：WUK550mA5V00-02 manufacturer：BYD mode3：A31-25132-500550US manufacturer：Aohai Notice: The actual condition for mobile phones using has the relation to the network of the local environmental conditions, SIM card and the way using.
Table of Contents Moblie Appearance picture...........................................1 1. Quick start.................................... 12 2. 3. Keypad Explain.................................................................12 Install SIM card.................................................................13 Install T-flash card............................................................ 13 Installing Battery...............................................................13 Battery Charging...........
4. 5. Accessories.................................... 20 SAR................................................
Foreword Honorific mobile phones user, thank you for choosing our mobile phone! Our cellular phones is according with the communication industry standards of PRC, and also according with the standards of European, and are approved for GSM networks. Your phone may be used internationally with various networks depending on your roaming arrangements with your service provider. To use this phone you must subscribe to a GSM service from a provider.
Safety Never attempt to disassemble your phone. You alone are responsible for how you use your phone and any consequences of its use. As a general rule, always switch off your phone wherever the use of a phone is prohibited. Use of your phone is subject to safety measures designed to protect users and their environment. Do not use your phone in damp areas (bathroom, swimming pool…). Protect it from liquids and other moisture.
way. Electronic equipment To avoid the risk of demagnetization, do not let electronic devices close to your phone for a long time. Electronic medical equipment Your phone is a radio transmitter which may interfere with electronic medical equipment or implants, such as hearing aids, pacemakers, insulin pumps, etc. It is recommended that a minimum separation of 15 cm be maintained between the phone and an implant.
1. Quick start Keypad Explain Key Function description Left softkey Pull down the status bar In home screen, Long press the key enter Right softkey recent app, other screens, back to home screen. Answer the incoming call, and in the home Green key screen, press the key enter the call history direct. Reject the incoming call, and in the home Red key screen, short press screen off, long press to power off.
Install SIM card This phone supports one GSM SIM card. Find SIM card’s groove in the back of the phone and slide it completely there. During installation, please make sure the chip is facing downwards and pay attention to slot direction. Note： 1. Keep SIM card out of children’s touch. 2. Any abrasion or folding could easily damage SIM card, so please be extremely careful when you insert, Remove and preserve it. 3.
Note: 1. Please use the standard battery and charger, or may explode. 2. If the battery is completely discharged, the battery icon should be in charge after 2 to 3 minutes to appear. Generally based on the current state of the phone (if boot, call, etc.) of different charging time for 2 to 5 hours. 3. Please use the charger, charging as much as possible to avoid using USB cable. 4. To ensure optimal battery performance, the completion of two to three times the battery charge and discharge cycles.
2. Call function Dialing 1.Direct dial In standby mode, press the corresponding number key to enter the phone number you want to dial, including the necessary area code. Short press “#” [Clear] to delete a character, short press the right soft key to delete all input, press the green key to dial. 2. Making an International Call: To make an international call, press and hold the [0] button until the screen displays the prefix "+" for the international call. 3.
3. Menu functions contacts The large-capacity mobile phone storage space that the phone has prepared for you. You can use the contact function of your phone to save contact names, numbers, avatars, email addresses, and more. Message Message service is a network dependent function, which allows you to send, receive and edit all kinds of messages. Please contact the network operator for more details. Edit a new message, save or send it to the recipient.
Note: 1. Your ISP may not support some features, in order to ensure the normal operation of the browser, make sure your SIM card is supported and open Internet access. 2. If you browse the web, you need to charge fees related to traffic. Settings 1.Network&Internet :include Airplane mode, Wi-Fi, Mobile network, Data usage, Hotspot&tethering, VPN etc. you can enter the corresponding menu to opera. 2.Connected device: include Bluetooth, USB etc.you can enter the corresponding menu to opera. 3.
FM radio FM radio is supported by the phone. You need to plug in the headphones used as an antenna to listen to the radio. Note: Quality of radio subscription is possible influenced by environment like indoor or under shield. You can improve this situation as following: stand closer to the window, adjust the position of earphone line or adjust the channel manually Gallery You use Gallery to view pictures that you’ve taken with Camera, downloaded, or copied onto your SD card .
3. Before using the phone as a Bluetooth device, you need to pair the phone with the target device as follows: -Sure your phone has Bluetooth-enabled. -Select "Pair new device" Bluetooth devices within the range of the phone will start scanning.
4. Accessories Use only batteries, chargers, and accessories approved by the manufacturer with this device. Use of any other types will invalidate the warranty and may be dangerous. Check with your dealer for available accessories. You may opt to buy: Charger Plug, charger cable Charger plug used to connect with the charger cable for charging on wall outlets. Also you can use the charger cable to connect with the other devices such as the personal computers to charge the phone.
5. SAR Specific Absorption Rate (SAR) This device meets applicable international safety requirements for exposure to radio waves. The mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves (radio frequency electromagnetic fields) recommended by international guidelines from the independent scientific organization ICNIRP (International Commission of Non-Ionizing Radiation Protection).
reducing your exposure, they recommend you reduce your usage or use a hands-free accessory to keep the device away from your head and body. 1) To prevent possible hearing damage, do not listen at high volume levels for long periods. 2) Fully understand user manual before use. 3) Ensure your player at low volume levels or power off before you leaving.
FCC Regulations This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Communications Commission of the United States. During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation of 10 mm. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value.
specified in IEEE1528. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: QPN-ONEIDA For this device, the highest reported SAR value for usage against the head is0.943W/kg, and for usage near the body is 1.260W/kg.
metallic components, to maintain a separation of 10 mm between this device and your body. RF exposure compliance with any body-worn accessory, which contains metal, was not tested and certified, and using such body-worn accessory should be avoided.
