Table of Contents Mobile appearance picture Mobile appearance picture ......................... 2 1. Foreword .......................... 3 2. Quick start ........................ 6 2.1 Icon Explain............................................. 6 Knowing the Keys ....................................... 7 2.2 Install SIM card ........................................ 7 2.3 Install T-flash card.................................... 8 2.4 Installing Battery ...................................... 8 2.
Honorific user, thank you for choosing our product! Our cellular phones is according with the communication industry standards of PRC, and also according with the standards of European, and are approved for GSM networks. Your phone may be used internationally with various networks depending on your roaming arrangements with your service provider. To use this phone you must subscribe to a GSM service from a provider.
aids, pacemakers, insulin pumps, etc. It is recommended that a minimum separation of 15cm be maintained between the phone and an implant. Your doctor or the manufacturers of such equipment will be able to give you any advice you may need in this area. Hospitals Always make sure that your phone is switched off in hospitals when so instructed by warning signs or by medical staff. Road safety Do not use your phone when driving.
Knowing the Keys 1. Left soft key/Right soft key: Implement the functions shown in the lower left/right hand corner. 2.Green key: Press the key enter dial screen. 3. Red key: Long press to switch phone on/off; Press to exit a menu. 4. Print key: press the key to quickly enter the print interface 5. Navigation Keys: Press the up/down/left/right direction in menu to scroll, browse or in edit page to move cursor.
the charging plug into attachment mode and the other end into electrical outlet, Screen will display the charging sign. After charging is finished, just pull out the plug. Note: 1. Please use the standard battery and charger, or may explode. 2. If the battery is completely discharged, the battery icon should be in charge after 2 to 3 minutes to appear. Generally based on the current state of the phone (if boot, call, etc.) of different charging time for 2 to 5 hours. 3.
3. Setting function 3.1 General 1. MP_profile The phone provides you with five profiles: General, Silent, Meeting, Outdoor and My style It’s help you according to the different events and environments in different custom ring tones. according to different scenarios, choose a different profile, then you only need to personalize your profile and activate. Note: The factory setting various modes set has been done and has been the general pattern of the default start Activate: Start the selected profile.
Display Wallpaper: The standby interface is used to set the background wallpaper. You can choose from the built-in wallpaper can also be selected from File Manager image file.
know the PUK code locked, do not random input, then the correct way is to call the SIM card hotline operators, after a simple user data are verified, you can obtain the PUK password to unlock the phone lock, the service is free of charge. Note: :Please use this feature with caution, if forget PUK password, please contact the network operator. If input PUK code in error for 10 times consecutively , SIM card will be scrapped.
lock time, the idle screen, mobile phone within the set time the keyboard does not perform any operation, it will be automatically locked, then you can press the # key to unlock. Note: Keyboard locked and the backlight is off, to be selected button lights up the screen, then press the # key to unlock 7.Connectivity Bluetooth The phone supports Bluetooth, users can turn the feature on according to demand. Bluetooth technology can connect electronic devices wirelessly.
phone reset to default settings. Please enter a privacy password (initial password is 1122), restore factory settings 9.Sound effects In this feature, you can set all audio equalizer. 10.Shortcuts Select this option to enter the functions directly that you often want to use.
Copy all: copy all contacts from phone to SIM, or from SIM to phone. Move all: move all contacts from phone to SIM, or from SIM to phone Delete all contacts: delete all SIM contacts or delete all phone contacts Add new contact -SIM1:New records added to the SIM1, each name can only be stored under a number. -SIM2:New records added to the SIM2, each name can only be stored under a number. -Phone:you can input name, number and set caller ring-tone. This Records stored in your phone. 3.
4.1 Application 1.Java Your phone possesses Java function with which you can download and install compatible Java games to your phone through network. 2.Java settings Set Java parameters. 3.Java default security Set the third party and entrusted domain parameters. And you can select [Restore settings] to set the parameters to the default. 4.2 SNS Message service is a network dependent function, which allows you to send, receive and edit all kinds of messages.
capacity of new messages is beyond the capacity of the inbox, the information will be lost and incomplete. In message list, press the Left soft key [Options] to make the following menu: -View: view the current message -Reply: Reply SMS to the message sender directly. -Forward: Forward the selected message to other contacts. -Delete: delete the selected message. -Delete all: delete all messages in inbox.
Memory status: can view the memory storage status. Preferred storage: you can choose to give priority to messages stored in SIM card or mobile phone. Preferred connection: You can select prefer connection: GPRS or GSM. Multimedia message Data account:Internet access account settings. Common settings: Compose: In the menu, you can set slide time, creation mode, signature set act.
site name and address for future quick access. Search or Input URL Enter the need to access the WAP services, and URL addresses, complete, can be connected to the WAP site you want to connect. From the surface in the bookmarks, web history, other than to provide you a flexible way to access the network.
matters. When you scheduled a matter of time arrives, the phone will provide a tone with you to complete these pre-arranged matters, the use of the same calendar 5 Alarm You can use the phone as alarm clock, this feature allows you to set time arrives, make the phone ring or vibrate to remind issue. When the alarm is turned on state, the alarm symbol is displayed in the top of the screen.
5. Input methods 6. Phone maintenance This phone provides diversified input modes for you to enter letter information when editing SMS and adding phonebook. Use the * key to switch between different input methods. When editing the key controls: The Left soft key: Generally represents confirmation. The Right soft key: Press to clear one character, long press to clear all. The End/Power key: Return to the idle screen. ABC (abc) input method Each key is used to input several characters.
- Do not use paint pigment cell phone to avoid moving parts and be stuck to proper operation. - Use a clean soft lens cleaning cloth. Such as: camera lens. - Replacement antenna, use only the supplied or designated by the antenna. Use of unauthorized antennas, cell phone accessories or modifications, could damage the device and may violate regulations governing radio devices. 35 7. Accessories Use only batteries, chargers, and accessories approved by the manufacturer with this device.
8. Environment 9. Technical Specifications Packaging To facilitate the recycling of packaging materials, please obey the sorting rules instituted locally for this type of waste. Batteries Spent batteries must be deposited at the designated collection points. The product The crossed-out waste bin mark affixed to the product means that it belongs to the family of electrical and electronic equipment.
10. FCC Notice Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 11. FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance.