User Manual Copyright ⓒ 2020. Lab-T, Inc.
User manual MS-ZNUW MOBISTAR 3F 303-16, 397, Seokcheon-ro, Bucheon-si Gyeonggi-do 14449, South Korea
Please read this manual before using the device to ensure safe and proper use. • Appearances and specifications are subject to change without prior notice. • Wireless charging covers and chargers are sold separately. Using the wireless charger Charging your mobile device Wireless charging 1. Connect a charger to the wireless charger. When properly connected, the product's status indicator lights up UV-C and a blue light illuminates for 30 seconds. Use only approved chargers (5 V/2 A, 5.3 V/2 A, and 9 V/1.
bought. • When the mobile device is not placed on the charging surface properly, or depending on the location of the mobile device’s wireless charging coil, your mobile device may not charge properly. • Depending on the location of the mobile device’s wireless charging coil, your mobile device may not charge properly. • Wireless charging may not work properly if you have attached a thick case to your mobile device. If your case is thick, remove it before placing your mobile device on the wireless charger.
• Size: (165 * 105 * 15) mm • Weight: Approx. 150g Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.