Product Description

BT-523 Dongle Specification

• The dongle fits for Motorola HT-1000

multi-pins radio.

• The dongle is compatible with many

Bluetooth headsets on the aftermarket.

• Just one-time pairing with wireless

headset/accessory

Type: Bluetooth Dongle for Portable Radio

Temp: -20℃±2℃ ~ 50℃±2℃

Approx. Weight: 30g

• Fully Qualified Bluetooth 5.0.

• Echo cancellation, noise reduction, also

extended features.

• High-Quality DAC, Qualcomm CVC built-in.

• 80MHz RISC MCU and 80MIPS Kalimba

DSP.

• No battery, no need charging.

• RoHS compliant.

• HSP / HFP / BLE profile support.

• PTT function: built-in.

• Talking Range: Bluetooth class 2, 10 meters.

• Display LED: Blue and Red.

• TX Current: 16 mA (Average).

• Talk time based on radio.

PAGE 1
BT-523 Dongle Specification • The dongle fits for Motorola HT-1000 multi-pins radio. • The dongle is compatible with many Bluetooth headsets on the aftermarket. • Just one-time pairing with wireless headset/accessory Type: Bluetooth Dongle for Portable Radio Temp: -20℃±2℃ ~ 50℃±2℃ Approx. Weight: 30g • Fully Qualified Bluetooth 5.0. • Echo cancellation, noise reduction, also extended features. • High-Quality DAC, Qualcomm CVC built-in.
PAGE 2
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 3
Uer Manual (Note: The Bluetooth-PTT needs to switch off before performing the following steps if it has been connected to the dongle) 1. Switch the dongle power on while pressing and holding the PTT button at the same time for about 3 seconds. It will enter the pairing mode for the Bluetooth headset. The blue LED will flash twice per second. 2. Power on the Bluetooth headset and enter the pairing mode.