Pendant FD User Guide Medical Alert Systems providing Independence and peace of mind.
Pendant FD User Guide How Pendant FD works Use Case 1 : EMERGENCY BUTTON press 1. Press the emergency button of pendant FD. 2. Your information and location are sent to the Emergency Operators. 3. Emergency operators establishes two-ways communication and assesses the situation. 4. Emergency operator contacts a neighbor, family member or emergency services based on specific need.
Pendant FD User Guide Use Case 2 : Fall Detection When you experience a fall in the shower or car park anywhere you are out of reach of a cell phone, pendant FD can send the signal for help in faster. Fall detect with and without cancellation 1. If you experience a fall , pendant FD waits twenty seconds to confirm that the user did not get back up. Pendant FD broadcasts Fall Detect RF signal. If no cancellation is received after twenty seconds, pendant FD will establish full alarm.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.