User’s Manual AP-10 (2019/Mar/11)
Copyright This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without the express written consent of the manufacturer. Disclaimer: The manufacturer makes no representations or warranties with respect to the contents hereof and specifically disclaim any implied warranties of merchantability or fitness for any particular purpose.
Power Cord Requirements The power cord you received with this computer conforms to local specifications for use in the country where you purchased it. Power cord use in other countries may require an additional adapter and/or separate power cord. For additional information on local power requirements, contact an authorized dealer, reseller, or service provider. About the AC Adapter The AC adapter will automatically recognize any compatible power supply connected to the computer.
Battery (Lithium-Ion) NOTE: Refer to following hazard statement within the service and operating documentation or on the adjacent label to the battery. 1. English CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY INSTALLED. REPLACE ONLY WITH SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER. DISCARD OF USED BATTERIES IN ACCORDANCE WITH THE MANUFACTURER'S INSTRUCTIONS. 2. French IL Y A DANGER D'EXPLOSION S'IL Y A REMPLACEMENT INCORRECT DE LA BATTERIE.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may case harmful interference to radio communications.
Table of Contents BEFORE USING YOUR COMPUTER ................................................... 1 Product Features ............................................................................. 2 Installation Guidelines...................................................................... 4 CHAPTER 1 .................................................................................. 6 GETTING STARTED .......................................................................... 6 Unpacking the Product .........
Before Using Your Computer Congratulations on your purchase of the product. You will soon be in command of the worlds most lightweight, efficient and secure solution for managing all of your technology and mission critical data. Scale the computer and streamline the costs of day-to-day business operations and multimedia demands. Discover the computer’s unparalleled in-the-field versatility for efficiently and reliably coordinating a myriad of tasks without costing a fortune.
The Instructions Manual Product Features The product is a portable multimedia device empowering highly mobile users with wireless computing capabilities for day-to-day business and wireless applications. Its light weight and supreme portability combined with state-of-the-art multimedia capabilities provide exceptional writing, maneuvering, and on your feet computing. The product’s primary features include: Processor and OS (Operating System): INTEL Pentium & celeron Apollo lake N4200 4 Core 2.
Before Using Your Computer Special Integrated Functions: Multiple special devices,Bar Code 、 Fingerprint、Scanner、MSR、Smart Card Reader 、2M / 5M Pixel both sides Camera, can provide useful functions for business and industrial area. Enhanced Protective Equipment ﹕ The computer, designed for IP65 ingress protection rating, can provide indoor and outdoor protections of no ingress of dust and water jets against enclosure without harmful effects.
The Instructions Manual Installation Guidelines Read the following before assembling or disassembling the computer: 1. Follow all warnings and instructions marked on the product and within the Manual. 2. Before you begin cleaning the computer, make sure that you have unplugged all power cords and the device is Powered Off. Use a damp cloth for cleaning. Do not use liquids of any kind of aerosol cleaners. 3. Never place the computer on an unstable surface; it may fall, causing serious damage to it. 4.
Before Using Your Computer a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the product. c. If the computer has been exposed to rain or water. d. If the computer does not operate normally when the operating instructions are followed. Adjust only those controls that are specified in the Operating Instructions or improper adjustment may require calibration again from a qualified technician. e. If the computer has been dropped or the housing has been damaged. f.
CHAPTER 1 Getting Started Chapter Preview: Unpacking and setting up the Product Packing list Power Supply The Stylus Pen
CHAPTER 1 - Getting Started Unpacking the Product Before unpacking the product, prepare a suitable workspace for your computer. Make sure the workspace is level, stable and near an electrical outlet. 1. Open the box and remove the contents preserving the integrity of the box as you may need it and all of the packing materials for future shipping. 2. Inspect the contents for damage. If you find any irregularities or anything appears to be missing, contact your Dealer immediately.
The Instructions Manual Power Supply The computer can be powered using either the built in battery or the AC Power Adapter plugged into any grounded AC power outlet. Using the Battery The primary source of power for the computer is a Lithium-Ion battery pack. The battery pack will first need to be installed on the backside of the computer. After following the battery installation instructions below, plug the AC adapter into any electrical outlet and the computer will begin recharging immediately.
CHAPTER 1 - Getting Started To install and remove the battery pack: Using the Power Switch to power down the computer. Power Indicator Battery Latch Battery Latch Battery Zero Battery One Power Indicator switch Installing the Battery Turn the latch to open position then removed the cover and gently put the batteries into the battery bay. Then, turn the latch to close position.
The Instructions Manual Battery Power Indicator 1. Pressing the power indicator switch to display the value of the battery. The battery value will showing on the LED board , Each one LED represent a 20 % value. Caring for the Battery Do not heat, tamper or place the battery in water or near a fire. Do not subject the battery to unusual forces such as hitting it, stepping on it or dropping it. Do not attempt to open or service the battery pack.
CHAPTER 2 System Overview This chapter contains six illustrations, highlighting each external component and its respective functions.
The Instructions Manual Front View of the Computer 2M CCD Microphone 10.1” TFT Panel Power button Barcode Trigger Hot key1 Hot key2 Hot key3 Hot key4 Status LED Fingerprint Rubber Corner 10.1” inch TFT (1280x800) LCD Display with Touch Screen Control Panel: Data can be entered the computer module using the stylus pen or a soft/USB/wireless keyboard. A soft keyboard can be located by tapping the keyboard icon in the bottom right on the desktop.
CHAPTER 2 – System Overview Microphone: Effortless input of monaural sound recording. 2 M CMOS Camera (Optional) : The build-in front 2M pixels CMOS Camera supports video applications for all media software. The user can make a video communication in the network. Power Button: The computer Turn On / Off Barcode On/Off The button provide a Trigger function for Barcode Scanner Hot Key These 4 quick access buttons are used for navigating applications in the Microsoft Windows 7& 8 & 8.
The Instructions Manual The device is virtually immune from attacking of fake finger. It can self-calibrate each sensor’s output signal for different skin conditions like sweaty, scarred and dry, to be an excellent image quality. Rubber Corner The Rubber Corner provides a protection of falling down and related damages.
CHAPTER 2 – System Overview USB 3.0 USB 2.0 DC In RS-232 DC-in Jack: Plug the DC (Direct Current) end of the AC Adapter into this jack for external power and battery recharging. Before plugging in the power cord, you must first verify that the external power voltage is appropriate for your geographical area. USB 2.0 & 3.0 Ports: Permits hot plugging of USB peripheral devices to the computer. The USB ports support most USB mouse and keyboard devices.
The Instructions Manual Network Jack(RJ45) Ear Phone Mini Smart card Reader Strap Hook Network Jack (RJ45): Interfaces with an Ethernet 10/100/1000 Mbps Base-T network connection. Mini Smart Card Reader (Optional): This device can read a various data include ATM card for business. Micro SD Micro Secure Digital (SD) Card Slot SAM (Optional) : SAM card slot to secure your data protection.
CHAPTER 2 – System Overview Docking Port ﹕ The extended multi-function included: the battery charger port, the USB ports supporting most USB mouse and keyboard devices, RJ-45 Internet port, RS-232 port, DC-In Jack, Microphone and Headphone. Top View of the Computer Barcode Scanner M.S.
The Instructions Manual Barcode Scanner (Optional): Omni directional bar code reading. Scan rate of up to 200 scans per second in linear emulation mode or 56 scans per second in Omni directional mode. Fully compatible with Intermec’s family of decoded engines. MSR (optional) : The reader delivers superior reading performance with the ability to encrypt sensitive card data.
CHAPTER 2 – System Overview Stylus Battery Indicator Cover Latch Battery Cover Battery Indicator Switch Speaker Kensington lock Stylus Pen(optional): A stylus pen is used to activate the touch screen display and functions in the same way as an external mouse. The stylus pen is partially visible from the left side of the computer and can be located by pulling it from its secure housing. Only use the tip of the stylus pen when interacting with the LCD display to prevent damage to the display surface.
The Instructions Manual Speakers: The computer’s built-in a single speaker support audio applications for all media software. Volume and equalizer control can be adjusted via the OS or additional multimedia application software. Sound will mute when headphones are detected. Battery Pack: 3-cell 3400mAh x2 removable Lithium-Ion battery pack comes standard with the computer. Each cell comes equipped with short circuit, over-charge, over-discharge, over-current and abuses protection.
CHAPTER 2 – System Overview And remove the battery pack Please insert the SIM Card to the slot 21
CHAPTER 3 Protecting & Maintaining Chapter Preview: Caring for your Computer Configuring DRAM and SIM Card Adjusting the Resolutions for the Computer’s Display and an External Display
CHAPTER 3 – Protecting & Maintaining Caring for Your Computer To guarantee a long life for the computer and to ensure it functions optimally, pay particular attention to the following recommended maintenance guidelines. Routine Care Follow these guidelines to keep the computer working properly: Do not attempt to disassemble or modify the computer in any way. Do not place anything on top of the device or its LCD display to prevent damage to the screen.
The Instructions Manual Caring for the AC Adapter Be sure to only use the AC adapter that comes provided with this product or a compatible option from the manufacturer. Other adapters may cause damage to the computer and will not be covered under the warranty. Grasp the adapter plug and not the cord, when unplugging the adapter from an electrical outlet. If the power cord becomes damaged (exposed or frayed, etc.), replace with a new AC adapter.
CHAPTER 4 Specifications & Software Chapter Preview: Specifications and Standard Features Software
The Instructions Manual Specifications and Standard Features Processor INTEL Apollo lake N4200 4 core 2.4GHZ Operating System ® Microsoft Win 10 ( Embedded / Professional ) Option: Linux System BIOS AMI BIOS Memory DDR III –L SO-DIMM Socket 1x204 pin support/ up to 4GB Display 10.
CHAPTER 4 – Specifications & Software Communication 10/100/1000 Mbps Base-T Ethernet LAN CMOS Camera 2M/5M Pixels CMOS Camera Module Support Auto Reverse Function MSR Encrypted MSR Bar Code Scanner Support 1D/2D bar code Smart Card Reader Operates ISO 7816 Fingerprint Sensor Scan Area: 9.6 mm x 0.
The Instructions Manual Battery External two 3-cell 3400mAh Removable Lithium-Ion Battery Pack. Short circuit, over-charge, over-discharge, over-current and abuses protected. Power Supply External AC Adapter (175g / AC Input 100~240V, 50/60Hz, 3 Pin Inlet / DC Output 16V, 4.0 A, DIM:107.7mm x 45.9 mm x 30 mm ) includes Power Cord. Included Accessories Stylus pen(Option), Hand strip, power cord, adapter and belt. Interface 1x USB 2.0 Port 1x USB 3.
CHAPTER 4 – Specifications & Software Docking USB 2.
The Instructions Manual Software Using The Front Panel Hot Key Utility Please refer to the following descriptions for each of all 5 hot keys. User define 1(Brightness) Key T : A dedicated button to enable / disable Bar code function.
CHAPTER 4 – Specifications & Software Key 1: The defaulted key function is “ adjusting Brightness “ of screen The user is able to redefine the function of key. Key 2: The defaulted key function is to launch “Cap Sound” application to enable / disable audio recorder. The user is able to redefine the function of key. Key 3: The defaulted key function is to launch “Windows Media Player” application to play music or video. The user is able to redefine the function of key.
The Instructions Manual Key 4: Press Key 4 to launch submenu function. The “submenu bar” as the following will be displayed on the desktop. The statuses of the communication capacities will be displayed on the submenu bar. Key 1, Key 2, Key 3 and Key 4 are endowed with different functions when the “submenu bar” was triggered. Please refer to the following descriptions.
CHAPTER 4 – Specifications & Software User define 1(Brightness) Click WiFi icon or press Key 1 to enable / disable the wireless function. Switch Click Bluetooth icon or press Key 2 to enable / disable the bluetooth function. Switch Click 3G i con or press Key 3 to enable / disable the 3G function.
The Instructions Manual Switch Click GPS i con or press Key 4 to enable / disable the GPS function. Switch Click OK icon or wait for 3 seconds to Exit. Define the Functions for Hot Key Utility 1. Right-click the “Hot Key” icon in the Windows system tray, then select “Define” to launch the “User Defined Function” application. 2.
CHAPTER 4 – Specifications & Software Click here select APP Make sure the defined APP path is correct. Your APP path Click “Save” to confirm your selections.
The Instructions Manual FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
CHAPTER 4 – Specifications & Software body, as described in this user guide, is 1.357 W/Kg(Body-worn measurements differ among Tablet PC models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various Tablet PCs and at various positions, they all meet the government requirement for safe exposure.
