CONTENTS SECURE PLUG™ (PATENT PENDING) USER GUIDE Product Manual for SECURE PLUG™ Contents 1. Materials in Box 2 2. Installation 3 3. Key Whitelist 4 4. Merchandising 5 5. Arming & Disarming the System 7 6. Remerchandising 8 7. Adding New User Keys 8 8. Deleting Whitelist 8 9. LED Status Indicators 9 10. FCC and ISED Statement 12 DO NOT REMOVE FROM STORE For additional support, please reach out to our Contact Center at 800-426-6844 www.mobiletechinc.com | T:800.426.
MATERIALS IN BOX SECURE PLUG™ (PATENT PENDING) USER GUIDE Secure Plug Power Strip (Region-Specific) Alarm Label Sheet Remote Access Module (Optional) www.mobiletechinc.com | T:800.426.
INSTALLATION SECURE PLUG™ (PATENT PENDING) USER GUIDE WARNING: No user serviceable parts inside. Please contact MTI for service. CAUTION: To Reduce the Risk of Electric Shock – Use Only Indoors. CAUTION: Risk of Electric Shock. Do not plug into another relocatable power tap or an extension cord. CAUTION: Use Only in Dry Locations. AVERTISSEMENT: Aucune pièce réparable par l’utilisateur à l’intérieur. Veuillez contacter MTI pour le service.
KEY WHITELIST SECURE PLUG™ (PATENT PENDING) USER GUIDE 1 Place Authorization Card over the RFID icon to register to 2 Place the User Key over the RFID icon you want to add. system. LED will be solid blue. If successful Æ unit beeps 2 times If unsuccessful Æ unit beeps 4 times (retry) Repeat process for all User Keys until they are successfully added. The whitelist process can be done on the Secure Plug unit or through the Remote Access Module.
MERCHANDISING SECURE PLUG™ (PATENT PENDING) USER GUIDE 1 Unplug any cables from the product end for products that have removable power cords. If the product does not have a removable power cord, turn the power to the product to OFF. 9 8 NOTE: Only supports products up to 10A. 2 Plug in product cables one at a time to the Power Strip. If successful Æ 2 beeps and LED will be solid green, this may take 20 to 60 seconds for products with larger power adapters.
MERCHANDISING SECURE PLUG™ (PATENT PENDING) USER GUIDE 3 Repeat steps with next product to merchandise. 4 When all products have been successfully setup, plug cables back into product end at this time. Apply an “Alarm” label to product end of cable, if desired. 5 Turn the power to products with a detachable power adapter to ON at this time. Keep power to other products OFF (ie. hardwired products or products without power adapters). www.mobiletechinc.com | T:800.426.
ARMING/DISARMING THE SYSTEM SECURE PLUG™ (PATENT PENDING) USER GUIDE 1 Place any User Key over the RFID icon and the LED will change from flashing white to solid white to indicate Armed. 3 If any cable becomes unplugged, the system will alarm. LED will flash red/white. The Remote Access Module will show a corresponding red LED for that socket port. 2 Turn the power to products to ON or OFF at this time, as desired. 4 Placing a User Key over the RFID icon will silence the alarm.
REMERCHANDISING 1a From an Armed state, place the User Key over the RFID icon to disarm the system. LED will be flashing white. SECURE PLUG™ (PATENT PENDING) USER GUIDE 1b From an Alarming state, place the User Key over the RFID icon to silence the alarm. Then hold down the User Key for 5 seconds to return back to the disarmed state. LED will be flashing white. 2 Merchandise a new product by following the process on page 5.
LED STATUS INDICATORS Visual Reference SECURE PLUG™ (PATENT PENDING) USER GUIDE System Status LED is solid white. LED is flashing white. Condition Armed 1. Disarmed 2. Merchandising Calibration Solution System is armed. 1. System is disarmed and needs to be rearmed. 2. System is calibrating product, wait until successful or unsuccessful merchandising before proceeding. Alarm System is alarming and needs to be attended to. LED is flashing red. Mains Power Loss Mains power loss has occurred.
LED STATUS INDICATORS Visual Reference System Status SECURE PLUG™ (PATENT PENDING) USER GUIDE Condition Solution LED is solid green. Ready to Whitelist System has an Authorization Card, but does not have any User Keys added. Follow key whitelist process. LED is flashing green. Factory Reset System has no whitelist or Authorization Card. Follow key whitelist process. LED is solid blue. 1. Whitelist Mode (if using Authorization Card) LED is flashing blue. LED is flashing yellow.
LED STATUS INDICATORS Visual Reference SECURE PLUG™ (PATENT PENDING) USER GUIDE System Status Individual LED is solid white (not main LED) Individual LED is solid red (not main LED) Condition Solution Merchandising successful for that socket port See main LED for overall system status. 1. If merchandising fails, unplug the product. Follow merchandising process again. 1. Merchandising unsuccessful for that socket port 2. System is alarming on corresponding socket port and needs to be attended to.
FCC AND ISED STATEMENT SECURE PLUG™ (PATENT PENDING) USER GUIDE FCC ID: 2AA2X-165-ØØ471 Model: 165-00471 FCC Statement FCC ID: 2AA2X-165-ØØ645-24 Model: 165-00645 / 165-00670 FCC Statement This device complies with Part 15 of the FCC Rules. Caution: If any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
