Product Manual

ManualsBrandsMobile Technologies ManualsElectronicsDigital Lock

MTI DOOR/DRAWER LOCKS™ PRODUCT MANUAL

MOUNTING TEMPLATE Print or Photocopy at 100% to assist in placing the Door/Drawer Lock.

DOOR/DRAWER LOCK PARTS

Door/Drawer Lock Kit - 185-00426

Door Drawer Lock Body

Strike Plate

Battery

x4 x2 x2

Screw Kit

Keys not included. See Page 6.

Summary of content (6 pages)

PAGE 1
DOOR/DRAWER LOCK PARTS MTI DOOR/DRAWER LOCKS™ PRODUCT MANUAL Door/Drawer Lock Kit - 185-00426 Strike Plate Door Drawer Lock Body Battery Screw Kit x4 x2 x2 Keys not included. See Page 6. MOUNTING TEMPLATE Print or Photocopy at 100% to assist in placing the Door/Drawer Lock. www.mobiletechinc.com | T:800.426.
PAGE 2
BATTERY INSTALLATION MTI DOOR/DRAWER LOCKS™ PRODUCT MANUAL 1 2 3 4 5 Battery Caution Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Remove batteries of uninstalled locks before storing. www.mobiletechinc.com | T:800.426.
PAGE 3
DOOR/DRAWER INSTALLATION MTI DOOR/DRAWER LOCKS™ PRODUCT MANUAL 1 Drill pilot holes for the lock mounting screws. See page 1 for a mounting template to assist in placement. Space devices at least 4” apart. 3a See diagram below for placement on a swinging cabinet door: 10 48mm 2 Line up the holes on the lock with the pilot holes in the fixture and secure into place with a Phillips-head screwdriver. Only use hand tools to install lock. Use of power tools can damage the fixture.
PAGE 4
KEY SETS (SOLD SEPARATELY) Key Starter Set – 185-00459 MTI DOOR/DRAWER LOCKS™ PRODUCT MANUAL User Key Bulk (x5) Pack 185-00460 Connect Card 401-00008 x5 x1 x1 x2 KEY REGISTRATION 1 Swipe Authorization card to enter enrollment mode. You will hear a double beep tone, indicating enrollment mode has been entered. 2 Swipe each User card to lock. A double beep tone indicates a card is now enrolled. Repeat for each user card, up to 250 user cards.
PAGE 5
INITIAL SET UP MTI DOOR/DRAWER LOCKS™ PRODUCT MANUAL Note: Operating temperature: 41-95° F. Converting to Connect Lock To use the MTI Connect Business Intelligence feature of your MTI locks you must have an internet connection, a MTI Connect Hub to create the mesh network, and the MTI Connect Card, which allows you to convert modes. In Connect mode, the lock will check in with the Hub every hour, and every time a lock is accessed.
PAGE 6
FCC Statement MTI DOOR/DRAWER LOCKS™ PRODUCT MANUAL FCC ID: 2AA2X-15ØØØ11824 Model: Door Lock FCC STATEMENT This device complies with Part 15 of the FCC Rules. Caution: If any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.