Product Manual

ManualsBrandsMobile Technologies ManualsElectronicsDigital Lock

MTI GLASS DOOR LOCKS™ PRODUCT MANUAL

BATTERY INSTALLATION & WARNING

Battery Caution

Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the instructions.

Remove batteries of uninstalled locks before storing.

Summary of content (6 pages)

PAGE 1
BATTERY INSTALLATION & WARNING MTI GLASS DOOR LOCKS™ PRODUCT MANUAL 1 2 3 4 5 Battery Caution Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Remove batteries of uninstalled locks before storing. www.mobiletechinc.com | T:800.426.
PAGE 2
GLASS DOOR LOCK PARTS MTI GLASS DOOR LOCKS™ PRODUCT MANUAL Thin Glass Door Lock Kit - 185-00427 Glass Door Lock Mount for Thin Glass (3-10mm) 165-00476 Battery Glass Door Lock Body Keys not included. See Page 6. Thick Glass Door Lock Kit - 185-00427 Glass Door Lock Mount for Thick Glass (10-19mm) 165-00477 Battery Glass Door Lock Body Keys not included. See Page 6. www.mobiletechinc.com | T:800.426.
PAGE 3
GLASS DOOR INSTALLATION & USE MTI GLASS DOOR LOCKS™ PRODUCT MANUAL 1 Slide the lock mount over the back sliding glass door 2 Tighten the knobs on the back of the mount. while it is in its closed position. Space devices at least 4” apart. 3 Slide the front glass door into its closed position and slide the lock over the lock mount blade. www.mobiletechinc.com | T:800.426.6844 Using the Glass Door Locks: Place the User Card on the lock.
PAGE 4
KEY SETS (SOLD SEPARATELY) Key Starter Set – 185-00459 MTI GLASS DOOR LOCKS™ PRODUCT MANUAL User Key Bulk (x5) Pack 185-00460 Connect Card 401-00008 x5 x1 x1 x2 KEY REGISTRATION 1 Swipe Authorization card to enter enrollment mode. You will hear a double beep tone, indicating enrollment mode has been entered. 2 Swipe each User card to lock. A double beep tone indicates a card is now enrolled. Repeat for each user card, up to 250 user cards.
PAGE 5
INITIAL SET UP MTI GLASS DOOR LOCKS™ PRODUCT MANUAL Note: Operating temperature: 41-95° F. Converting to Connect Lock To use the MTI Connect Business Intelligence feature of your MTI locks you must have an internet connection, a MTI Connect Hub to create the mesh network, and the MTI Connect Card, which allows you to convert modes. In Connect mode, the lock will check in with the Hub every hour, and every time a lock is accessed.
PAGE 6
FCC Statement MTI GLASS DOOR LOCKS™ PRODUCT MANUAL FCC ID: 2AA2X-15ØØØ11824 Model: Glass Lock FCC STATEMENT This device complies with Part 15 of the FCC Rules. Caution: If any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.