User's Manual

ManualsBrandsMobile Intouch ManualsElectronics4G ROUTER

User manual

Beam Eagle

Power adapter input: AC 100-240V 0.6A

Router input power: DC 12V 1.5A

Battery: 3.7-4.2 V, 4800 mAh

Insert SIM card and Connection method

Plug power adapter if you do not want a wired connection,

the cable is not necessary to be connected

After power on, press the product power on/off button to start

the router.

Use router wifi signal

Method two: Using the WiFi name and password connection

Method one: Using WPS fast connection function

Reminding:

4G ROUTER

The mobile data network indicator lights, according to the

type of network used by the plug-in card, recognizes the card,

and the corresponding 4G/3G indicator lights up.

Device power indicator light, light up after electricity

Wireless status indicator WiFi enable (constant)

data transmission (scintillation)

Data status indicator light, network connection success (flashing)

SIM

15 x 25 (mm)

Micro SIM

12 x 15 (mm)

Nano SIM

8.8 x 12.3 (mm)

Micro SIM or Nano SIM card needs to be restored by card sleeve to SIM to insert;

otherwise it will not be ejected inside the card.

Insert SIM card

According to the interface identification on the device, insert the

SIM card, pay attention to the metal electric shock and the missing

direction of the card.

Turn on your cell phone wifi and search wifi name BEAMX71-LongRange

or BEAMX71-5G , input wifi password stating on the label of back router

(Each product got certain SSID name and password, you can find these

information on rating label), connected to wifi network.

The WPS function means that the connection between wireless Internet devices

can be quickly established. If you have wireless internet access equipment

supporting WPS connection, you can refer to the following steps to connect; if the

connection device does not have this function you can skip this step.

The following is an example of a USB network card, the wireless network can be

quickly connected by the following ways:

Press the WPS button on the side of this device; enable wps function, the

equipment corresponding to the indicator lights up.

Then press the WPS fast connection button on the network card for 2-3 seconds.

For specific operation, please refer to the WPS connection of your equipment

instructions.

WPS function is just a fast connection way. Different wireless Internet devices

may operate differently. It is recommended that you check the instructions of

the device for understanding.

If WPS match fails, it is recommended that you connect internet by wireless

name and wireless password on the device label.

Please insert sim card and connect correctly

1: Insert SIM card on right position of router

2: Power on power adapter and connect to router

3: Suggest using cell phone for configure settings, no need cable. If

you want to use computer for configuration you need connect router

lan port to computer, make sure connection is correct, computer use

dynamic IP obtaining.

After router power on it will transmit

default wifi BEAMX71-LongRange

and BEAMX71-5G, cell phone just

connect this wifi. If you did not find this

wifi network please check SSID and

password on label, or reset router. How

to reset router please refer FAQ 1

As shown in the pic, the SIM

missing corner face inside,

the metal chip faces the

front of the device, inserts

the slot, you can hear clatter

and fasten it.

As shown in pic, press the product

power on/off button to start the

router. Initialization may take time,

please be patient.

Connected devices

Cable Connection

Connect

LAN1/2/3/4 Port

Connect

Wan Port

Power

supply socket

Wireless Connection

After connecting the device, please check whether the router

indicator is normal.

If the indicator is abnormal, please check whether the card is correct,

whether the power is on and press power on/off button.

Congratulations

You can use SIM data to surf internet now!

Thanks for choosing our product, please read this instruction

manual carefully before using, use the steps to operate this product.

Keep it in safe place for future use after reading.

The wireless name and

password can be obtained on

the label on the back of the

device.

BEAMX71-LongRange2.4GHz BEAMX71-5G5.8GHz

Summary of content (2 pages)

PAGE 1
2 Plug power adapter if you do not want a wired connection, Insert SIM card and Connection method 4G ROUTER Beam Eagle the cable is not necessary to be connected 1 Insert SIM card Connected devices According to the interface identification on the device, insert the SIM card, pay attention to the metal electric shock and the missing direction of the card. SIM Micro SIM Nano SIM 15 x 25 (mm) 12 x 15 (mm) 8.8 x 12.
PAGE 2
1: Remove the battery cover. 2: Take out the connector of battery compartment then connect to the battery. 3: Put the battery in the battery compartment and close the cover. Answers to common questions 1: Use the cell phone to connect the default WIFI signal transmitted by the router. See step 3 of insert and connection mode by using the router WiFi signal. FAQ 1: Forgot username and password how to do? (How to reset the router?).