STEALTH M2M-6 4G+ Direct Connect Cellular Machine to Machine Signal Booster DIRECT CONNECT 15dB USA User Manual Cellular RX/TX Signal Booster 6 BAND MULTI BAND 15dB 6 BAND MULTI BAND 15dB Machine to Machine 2G, 3G, 3G+, 4G, 4G+ GSM,HSPA,CDMA,LTE, LTE A Band 12,17 Band 13 Band 5 Band 4 Band 2,25 700MHz Lower 700MHz Upper 850MHz 1700/2100MHz 1900MHz ext stealth tech ® In 2001 Smoothtalker produced the first digital mobile cellular signal booster in North America with FCC and ICAN approval.
Contents Cellular Booster Cellular Modem or other M2M device (Not included) Outside antenna Fig. 1 Optional Power Types 12 volt install fused type 12 volt socket CLA plug type 120 volt AC/DC All parts shown are not included in all kits. Please check your model number for more details at smoothtalker.com NOTE: It is normal for the booster to be quite warm while the phone is in use state.
Installation & Assembly This Direct Connect M2M Booster is designed to be placed between the cellular device and it’s outside antenna. Make all connections as in Fig. 1 and see Applications in Fig.2 & Fig. 3 Important: Use only the power supply included with the booster. Connecting any other power supply at any time will result in damage to the booster and will void the warranty.
Hp Att Osc Att RX High Power Attenuation Oscillation Attenuation Band Frequency Band 12, 17 Band 13 Band 5 Band 4 Band 2, 25 700MHz Lower 700MHz Upper 850MHz 1700/2100MHz 1900MHz ext Green LED Orange LED Understanding the lights The “LEDS” on the face of the booster indicate operating gain state. In any given frequency band there is a Green and Orange LED which indicate the gain status of the band.
Understanding the lights Attenuation Each flash indicates 3dB of gain reduction also known as gain attenuation. For example: three flashes equals 9dB of attenuation.
Band M2M Direct Connect Kit Typical Booster Kit (with SMA adaptor) Model shown BTUX615Min81H Specifications MODULATIONS OPERATIONAL BANDS FREQUENCIES TX POWER GAIN POWER SUPPLY OPERATING TEMP DIMENSIONS WEIGHT 5 Stealth M2M-6 4G+ 2G, 3G, 3G+, 4G, 4G+, GSM, HSPA, CDMA, LTE, LTE A Band 12/17 Band 13 Band 5 Band 4 Band 2/25 700 MHz lower 700 MHz upper 850 MHz 1700/2100 MHz 1900 MHz 1 watt EIRP 15 dB 12V DC CLA OR 12V DC fused or 120V AC/DC -22 F TO + 185 F L 4.56 xW 2.15 x H 1.25 (inch) 0.
Approved Equipment List For specifications of any of the Smoothalker FCC approved part numbers listed below visit smoothtalker.com FCC requirements prohibit the use of unauthorized Antennas, Cables, and/or Coupling devices.
This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.