Mobile X6 4G LTE 6 BAND MULTI BAND 50dB Wireless Booster Extreme Power USA User Manual Cellular RX/TX Signal Booster 50 dB 6 BAND MULTI BAND 50dB Wireless Booster Extreme Power 2G, 3G, 3G+, 4G, 4G+ GSM,HSPA,CDMA,LTE, LTE A Band 12,17 Band 13 Band 5 Band 4 Band 2,25 700MHz Lower 700MHz Upper 850MHz 1700/2100MHz 1900MHz ext stealth tech ® In 2001 SmoothTalker produced the first digital mobile cellular signal booster in North America with FCC and ICAN approval.
Contents Inside antenna Cellular Booster Optional outside antenna Optional Power Types 12 volt install type 12 volt socket plug type 120 volt AC/DC All parts shown are not included in all kits. Please check your model number for more details at smoothtalker.com NOTE: It is normal for the booster to be quite warm while the phone is in use state. To comply with FCC rules, this booster must only be operated with cables, antennas and coupling devices that have been approved for use with this equipment.
Installation Installation 1) Connect the outside antenna to the side of the booster marked as “outside antenna” Connect the inside antenna to the side of the booster marked as “inside antenna” 2) Placement Place the outside antenna in the middle of the vehicle roof. If the vehicle has a sunroof please place the antenna on the roof towards the back window. Place the Patch (inside) antenna in desired location. For cars and trucks the console between the front seats is recommended.
Hp Att Osc Att RX High Power Attenuation Oscillation Attenuation Understanding the lights Band Frequency Band 12, 17 Band 13 Band 5 Band 4 Band 2, 25 700MHz Lower 700MHz Upper 850MHz 1700/2100MHz 1900MHz ext Green LED Orange LED The “LEDS” on the face of the booster indicate operating gain state. In any given frequency band there is a Green and Orange LED which indicate the gain status of the band.
LED Lights Status Explanation Attenuation (Att) Each flash indicates 3dB of gain reduction also known as gain attenuation. For example: three flashes equals 9dB of attenuation.
Band Wireless Kit Extreme Power Typical Booster Kit Model shown BMUX650MSPC Specifications MODULATIONS OPERATIONAL BANDS FREQUENCIES TX POWER GAIN POWER SUPPLY OPERATING TEMP DIMENSIONS WEIGHT 5 Mobile X650 4G LTE 2G, 3G, 3G+, 4G, 4G+, GSM, HSPA, CDMA, LTE, LTE A Band 12/17 Band 13 Band 5 Band 4 Band 2/25 700 MHz lower 700 MHz upper 850 MHz 1700/2100 MHz 1900 MHz 1 watt EIRP 50 dB 12V DC CLA OR 12V DC fused or 120V AC/DC -22 F TO + 185 F L 4.72 xW 4.25 x H 1.25 (inch) 1.
Approved Equipment List For specifications of any of the Smoothalker FCC approved part numbers listed below visit smoothtalker.com FCC requirements prohibit the use of unauthorized Antennas, Cables, and/or Coupling devices.
This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.