Nokia Bluetooth Headset BH-701 User Guide Issue 1
DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this HS-74W product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/ EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity/. © 2007 Nokia. All rights reserved. Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.
The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you. Unauthorized changes or modifications to this device may void the user's authority to operate the equipment. Export Controls This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.
Contents Contents 1. Introduction ......................... 5 3. Basic use ............................. 12 Bluetooth wireless technology.......... 5 Place the headset on the ear ........... 12 Call handling......................................... 12 Adjust the headset volume............... 13 Mute or unmute the microphone ... 13 Switch the call between headset and mobile device........................................ 13 Clear settings or reset ........................ 13 2. Get started ..............
Introduction 1. Introduction With the Nokia Bluetooth Headset BH-701 you can make and receive calls while on the move and use your mobile device hands free. You can use the headset with compatible devices that support Bluetooth wireless technology. Read this user guide carefully before using the headset. Also read the user guide for your mobile device, which provides important safety and maintenance information. Keep the headset and its accessories out of reach of small children.
Introduction The headset is compliant with the Bluetooth Specification 2.0 + EDR supporting the following profiles: Headset Profile 1.1 and Hands-Free Profile 1.5. Check with the manufacturers of other devices to determine their compatibility with this device. There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider.
Get started 2. Get started ■ Overview The headset contains the following parts: • Earpiece (1) • Indicator light (2) • Charger connector (3) 6 7 • Volume key (4) • Microphone (5) • Earloop (6) • Multifunction key (7) Before you can start using the headset, you must charge the battery and pair the headset with a compatible device. Parts of the headset are magnetic. Metallic materials may be attracted to the headset.
Get started Warning: Use only batteries and chargers approved by Nokia for use with this particular enhancement. The use of any other types may invalidate any approval or warranty, and may be dangerous. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord. ■ Charge the battery The headset has an internal, nonremovable, rechargeable battery. Do not attempt to remove the battery from the headset, as you may damage the headset. 1.
Get started ■ Switch the headset on or off To switch on, press and hold the multifunction key until the headset beeps and the indicator light turns on. When the headset tries to connect to a paired device, the indicator light flashes green slowly. When the headset is connected to a paired device and is ready for use, the indicator light flashes blue slowly. If the headset has not been paired with a device, it automatically enters the pairing mode (see “Pair the headset,” p. 9).
Get started separately after pairing. See the user guide of your device for details. You only need to pair the headset with your device once. If the pairing is successful, the headset appears in the menu of the mobile device where you can view the currently paired Bluetooth devices. Disconnect the headset To disconnect the headset from your mobile device, switch off the headset, or disconnect the headset in the Bluetooth menu of your device.
Get started • Ensure that the headset is within 10 meters (30 feet) of your device and that there are no obstructions between the headset and the device, such as walls, or other electronic devices.
Basic use 3. Basic use ■ Place the headset on the ear Place the earloop behind your ear (1), and gently push the earpiece into your ear. Rotate the headset so that it points toward your mouth (2). If you wear an earring, ensure that it is not accidentally attached to the earloop. ■ Call handling To make a call, use your mobile device in the normal way when the headset is connected to it. The blue indicator light flashes slowly during the call.
Basic use To reject an incoming call, press the multifunction key twice, or use the keys of the mobile device. To end a call, press the multifunction key, or use the keys of the mobile device. ■ Adjust the headset volume Press the volume key up to increase or down to decrease the volume during a call, or use the keys of the mobile device. To adjust the volume quickly, press and hold the volume key in the desired direction.
Basic use headset enters the pairing mode for about 5 minutes (the indicator light flashes blue quickly). To reset the headset if it stops functioning, although it is charged, plug the charger into the headset while you press and hold the multifunction key. The headset switches off. To use the headset, reconnect it to your mobile device. The reset does not clear the headset settings.
Battery information 4. Battery information Your device is powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge your battery only with Nokia approved chargers designated for this device. Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime.
Care and maintenance Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, allow it to dry completely. • Do not use or store the device in dusty, dirty areas.
