iRISPrint 1.0 Internal Installation Instructions Rev 0 3700 S.
FCC Statement WARNING! This module is to be installed only in Mobile Aspects end products by Mobile Aspects personnel, and shall not be offered to 3rd party OEM integrators or the general public. Federal Communications Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Table of Contents 1. INTRODUCTION............................................................................................................................................................................ 4 1.1 2. PURPOSE OF THE DOCUMENT ...................................................................................................................................................... 4 INSTALLATION INSTRUCTIONS ..........................................................................................
1. Introduction 1.1 Purpose of the document The purpose of this internal document is to provide work instructions on how to install the printer main controller and printer antenna inside a console and printer. 2. Installation Instructions 2.1 Printer Main Controller Printer main controller location inside the console 1) Motherboard 2) 3) Ribbon Cable With a hex driver, install the printer main controller using 6-32 button head screws.
2.2 Printer Antenna 1) Install printer at this location inside the printer. 1) Attach the antenna cable at this this location in the back of the printer.
2.3 Console to Printer Connection Connect the printer to the console as show below.