P/N : SAFF022M0GQ User Manual DAH-220 Cassette Tape Type MP3/WMA Player Digital Voice Recorder / Direct Music Encoder FM Radio & FM Recorder / Mass Storage Drive
Avoid exposure to direct sunlight or heater. (High heat applied to the product can damage it.) Avoid places with high moisture or dust level. (It can cause damage to the product.) Do not drop the product and avoid any heavy inpact to the product. (It may cause serious damage) Don’t connect the product to the power nor touch the product with wet hands. (There is a risk of an electric shock.
Don’t wash the product with chemicals or a detergent in order to protect the outer surface paint from cracks or deterioration. Never disassemble, repair nor rebuild. Contact to our A/S center if the product is out of order. listening to music at high volume for long periods of time using headphones may cause hearing problems. We are not responsible for the loss of data stored on the product due to user’s carelessness (please backup important data) Sharing music without permition is against copyright.
Welcome to the World of Digital Audio What is a Digital Audio Player? Special Features of the Product Product Specification Hardware Descriptions PC System Requirements and Accessories Simple Use of the Player How to Use? 1 2 3 5 6 7 8 Software Software Installation USB Cable Separation File Download/Upload Formatting File Converting OS Update 10 14 17 20 26 29 How to Use? Charging Rechargeable Battery (AC/DC) About Power Supply Power On & Playing Music 32 33 35 Volume Control Selecting Next & Previou
Thank you for purchasing the MP3 Player, a cassette tape-shaped portable digital audio player. This product has been designed for you to enjoy high quality digital sound with normal analog audio system without using any adapter or subsidiary device. Memory capacity can be easily increased using a Multi Media Card (MMC) along with a built-in memory. The product can be upgraded with the new software whenever required and supports various formats (MP3, WMA, ADP).
Cassette Tape-like Design In addition to its self-playing function, the newly developed unique gear mechanism in the product enables the same FF/ REW/ PLAY/ REC functions as those of a normal cassette tape, like in-car or domestic audio systems. Without connecting to a PC the product enables to record FM radio, CD or cassette tape sounds in digital format while enjoying them. It is also very helpful for those who are learning languages etc.
Category Item Specification External Memory(MMC) Slot Volume Controller FM Frequency Range 87.5MHz~108.0MHz FM TUNER Headphone output Max. 7mW (16 ) at max. volume S/N Antenna Frequency Characteristics Play/Stop/Pause/Power LED 50dB Headphone/earphone cord antenna FF/REW REC/ RPT A-B 20Hz ~ 20KHz High Sensitivity Microphone Headphone output Audio USB Max. 7mW (16 ) at max. volume S/N 90db File type MP3, WMA no DRM Bit Rate MP3: 8Kbps or higher Download speed 4Mbps(USB Version 1.
You may use the player in the following methods; 1 1. Microsoft OS (Windows 98SE, ME, 2000, XP) 2. CD-ROM Drive 3. Pentium 200MHz or higher CPU 4. 32MB (64MB for Windows ME or 2000) or higher RAM 5. Available hard disk space of more than 128 MB (Additional hard disk space is needed for storing music files) 6. Sound Card 7. USB Port 2 3 Accessories 4 Earphones Portable Case instruction manual Encoder Cable USB cable AC Adapter Software CD 1.
7 After disconnecting the USB cable from the player, press PLAY button ( II) to turn the power on. Press the Play button again to listen to your music. (Blue LED keeps blinking) Enjoy digital sound with an earphone or by inserting the player into an audio deck. Please Note! Push the earphone jack completely into the player If the player does not start even when pressing The PLAY ( II) button with the slide switch in “MUSIC” position, press the PLAY ( II) button.
3 11 clicking the OK button, the window system will restart at the 4 By completion of installation. Click! Click! Click on NEXT after selecting a folder wherein the software will be installed. Click! Click! Software Installation Software Installation 2 Click on NEXT. Click! Click! of windows XP version the following box will appear when 5 Inthecase window system restarts.
After installing the software, click on Convert or Format shortcut by selecting indows Start Program DAH-220 Utility’ in sequent to run the program. Connecting the Player to a PC using a USB Cable Connect one end of a USB cable to one of the USB ports on the PC, and connect the other end to the player.
separating the USB cable from the PC, double 1 Before click on the green arrow on the toolbar located at the the message “Hardware Safe Removal” 3 When appears, click on OK and disconnect the USB cable. bottom right of the Windows screen. Click! Click! When using Windows 98SE; Double DoubleClick! Click! the USB device to be separated and click on 2 Select STOP and OK button.
Please Note! on PASTE using the right button of the mouse in 2 Click the Removable disk as shown on the figure. This player also enables data (.jpg .xls .doc and etc) upload/download as a portable storage disk. In the root folder of the removable disk up to 256 files with less than 8 characters in their file names can be saved. There is no limit number of files in the sub folder.
Completion of Installation (For Windows XP) Connect the player to the PC in its Recovery Mode. To enable Recovery Mode; Turn the power on Formatting File Download/Upload saving has been completed in the player as 3 File shown below. Press VOL+ and FF buttons simultaneously for more than 2 seconds. if the orange colored LED blinks, the player is in Recovery Mode. 1 The following wizard will appear. Please follow the instructions.
wizard program has been completed. Click on 3 The FINISH button. Formatting Formatting Windows XP, the following message will appear. 2 For Press CONTINUE button to keep on the process.
After connecting the player to the PC using a USB cable, select and execute “DAH220 Utility Format” from START PROGRAMS. 1 Click on ‘Start’ by selecting the function. Verify the OS version that you’re currently using. (Recovery Mode – See page 20) Formatting Formatting Formatting the Internal Memory (recommended) Click! Click! Click! Click! Caution! Please note that formatting the player will delete all files. 23 2 Click on ‘OK’ on the validation box.
File Converting Click on and execute CONVERT file by selecting START PROGRAM DAH220 Utility CONVERT. File Converting Formatting 3 Format is in process. Please Note! Click! Click! A fatal error may occur if the USB cable is removed during Memory Format. has been completed. 4 Format Click on OK button.
format (ADP WAV, WAV 2 Select the folder where the files are to be saved. File Converting File Converting 1 Select the file to be converted after choosing the desired ADP) to convert to. Select the type to be converted. 3 Starting file converting. Click on START button. 4 File conversion has been completed. Select the type to be converted.
(Recovery Mode – See page 20) Please Note! OS Update OS Update 2 Connect the USB cable to the PC while in Recovery Mode. OS Update Before starting the update check the following: - Quit all the programs currently in operation. - Disconnect any USB device from the PC. 1 Execute DAH220_xxxxxx.exe file which can be downloaded from the website www.mobiBLU.com and click on NEXT button. Click the NEXT button once activated.
Charging Rechargeable Battery (AC/DC) Charging battery with an AC adapter - The Charger LED will go out when the battery is fully charged for 2-3 hours. - When using the battery for the first time, fully charge the battery for more than 2 hours. NOTE:To ensure battery is completely re-charged, charge for a further 30 minutes AFTER the led goes out. - Disconnect the power cord when not using the adapter.
1 Open the battery compartment cover by sliding it away from the player. 2 Press and hold the PLAY ( II) to turn the power on. The blue LED blinks for 2-3seconds and then goes out. Playing Music 1 Play Press the PLAY button again to play the file. The blue LED will blink. Insert the batteries ensuring polarity is correct. 3 Push and close the cover. 2 Pause Press the PLAY button again while a music is playing to pause the track.
Stop By pressing the PLAY ( II) button while playing music, the player pauses. By pressing and holding the PLAY ( II) button once for longer seconds the player turns off. (Blue LED turns on for 2-3 seconds and then off) Volume Control Adjust the volume using the VOL +/- button on the player. Please Note! If the player is idle for more than five minutes in pause or stop mode, the player automatically turns off.
1 Searching a certain part of a file - Press and hold the FF/REW button for a longer period to search a certain part of the music while it is playing. - release the button to continue play 1 Starting voice recording By turning the power on, press and hold REC/A-B button until an orange LED turns on, and press the button once more to start the voice recording. Then the orange LED will blink. 2 Searching a file in the play mode - Press REW/FF button while the track is in playing to play the next track.
Recording with an encoder cable 1 Turn the power on by moving the slide switch to MUSIC and press REC/A-B button for longer seconds to make the player ready to record with an orange LED on. 2 Connect one end of the encoder cable to an earphone port of a normal audio system. Connect the other end to INPUT AUDIO of the player. 3 Press and hold REC/A-B button to start music recording and the orange LED will blink. 4 Press PLAY ( II) button to stop the recording, this will create a new sound file.
1 About Recorded File Please Note! Turn the power on after switching the slide switch to MUSIC. 2 Press and hold REC button until the orange LED turns on and insert the player to the deck. 3 Continue the recording according to the key functions of the audio deck. Recorded voice will be saved as an ADPCM file with the file extension of *.ADP. Recorded music will be saved with the file extension of *.MP3. The process of voice recording will be automatically stopped if the memory is full.
Move the slide switch on the upper side of the player to FM and press PLAY ( II) button once shortly to turn on the FM radio. 1 FM Listen / Stop - Move the slide switch to FM to initialize the player with a pink LED blinking for 2-3 seconds. (Pause Status) Press PLAY ( II) button once shortly in the pause status to turn on the FM radio with a pink LED blinking. - Press and hold PLAY ( II) button for longer seconds to turn off the radio.
1 Press the REC ( ) button while listening to the radio. (Orange LED turns on) - Press the button again to start the recording the orange LED will blink. - The FM sound resource you’re currently listening to will be recorded as a MP3 file. 2 Press PLAY ( II)) after recording the sound source. - Then the recording stops creating a file. - Files will be saved as E001, E002,… in sequence. When the memory gets full of files, it stops automatically.
the deck for more than 4 seconds for fast forward/rewind. 1 Insert the player in the direction of the arrow ( Selecting a file from the deck ) marked on the front side of the player. Please Note! Check if the play direction of the audio deck is ( ). If the play direction is ( ) change the direction by pressing PLAY button on the deck. 1 Press REW/FF button on the audio deck for less than 4 seconds and press PLAY to move to next/previous song.
The volume can be controlled by the volume controller mounted on the deck. The volumes may vary as the files have been converted with different volumes. Note! Power-save mode when playing in the audio deck The player will be in power-save mode while it is not being used for more than five minutes. To use the player again in the audio deck press PLAY button on the deck. Auto Power On Function You don’t need to turn the power on after pulling the player out.
The player is not working. Can not turn the power on or play a file Check if the battery is flat. - Reinsert the battery. - Check the polarity of the battery - Execute OS update or format after connecting to the PC. - Check if the slide switch is in MUSIC position - Check the polarity of the battery - Check if the battery is flat. - Reinsert the battery. Cannot download a file - Check the USB connection “PLAY” is not working.
- Check the USB connection - Reinstall the software CD Warranty Services Customers are entitled to warranty service for a period of one year from the date of purchase. Warranty service does not apply to defects resulting from customer fault or acts of God. Bad sound quality when playing with an audio deck Non-warranty service shall apply to defects resulting from : - Adjust the position of the head using the headcrontrol switch on the player. 1.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Memo WARRANTY FORM Warranty Term: 1 year from the date of purchase Product Model : Date of Purchase : Name of purchaser : Address : Place Purchased : Address : (month) (day) Phone Number : (year) Phone Number : Hyunwon Incorporated You need to show this Warranty Certificate with the date of purchase when requesting service, in order to receive satisfactory services. Please keep the Warranty Certificate in a safe place. 1.
