Compatible with… Compatible with…
TABLE OF CONTENTS INTRODUCTION Introduction 1 Package Contents 2 Features 3 Consumer Guide to Product Safety 4-5 Knowing your Receiver 6 Knowing Your Transmitter 7 Installation & Setup 8 Receiver/Transmitter Operation 9 Troubleshooting 10 Radio Interference Advice 11 Warranty 12 Notes 13 Congratulations on the purchase of the Mobi® Pure Sounds™ Audio Monitoring System, which brings you the latest in wireless technology.
PACKAGE CONTENTS 1 x Receiver Unit (#70294R) 1 x Transmitter Unit (#70294T) FEATURES • Trasmission Range up to 600Ft • 2.
CONSUMER GUIDE TO PRODUCT SAFETY Please read this instruction manual before using your Mobi® Pure Sounds™ system. When using electrical appliances, basic safety precautions should always be followed. Please keep safe for future reference. • This product is not intended to be used as a medical monitor and its use should not replace adult supervision. • Periodically examine this product for damage to the cord, housing or other parts that may result in the risk of fire, electric shock or injury.
KNOWING YOUR RECEIVER KNOWING YOUR TRANSMITTER Button & LED Functions 1. Power On/Off Button 2. Volume Up ( + ) 3. Volume Down ( - ) 4. Sound Level Indicator (LED will flash indicating noise level increase) 5. Power On Indicator (battery charge indicator) 6. Link Indicator LED (LED will blink if connection is poor/lost) 7. Speaker 11. Power On Indicator 11 5 6 4 8. 9. 10. DC Jack (5V/600mA) Belt Clip Battery Compartment 7 12.
INSTALLATION & SETUP The Mobi® Pure Sounds™ transmitter is designed to be powered by either rechargeable batteries (provided) or the AC/DC adaptors. Using AC/DC adaptor: • Plug the connector of the AC adaptor into the DC Jack on the unit (fig. 7 pg. 6, fig. 12 pg. 7). • Plug the power cord into an outlet. • Press the Power On/Off Button (fig. 1 pg. 7) to turn ON your receiver. • The power indicator lights will illuminate indicating units are ON (fig. 5 pg. 6, fig. 11 pg.
TROUBLESHOOTING Problem Transmitter will not turn on Receiver will not turn on Battery does not recharge Connection is lost Solution • • • Check AC/DC Connection. Confirm power outlet is working properly. Charge Battery Pack • • Check AC/DC Connection. Confirm power outlet is working properly. • • AC/DC adaptor has not been connected. Check battery pack connection to receiver. • • • • • Confirm receiver and transmitter are ON. Confirm AC/DC adaptor is connected properly.
WARRANTY NOTES Mobi Technologies, Inc. warrants this product to be free from defects in material and workmanship for a period of ninety (90) days from the date of purchase. Should this product prove to be defective at any time during the warranty period, Mobi Technologies, Inc. will, at its option, either replace or repair it without charge. After the warranty period, a service charge will be applied for replacement of parts or labor for repair.
Mobi Technologies, Inc. 5913 Blackwelder St Culver City CA 90232 Toll Free Number (877) 662-4462 www.getmobi.com Mobi and Pure Sounds are registered trademarks of Mobi Technologies, Inc. © 2012 Mobi Technologies, Inc.