Wireless Audio/Video Monitoring System Compatible with… Compatible with...
TABLE OF CONTENTS Introduction 1 Package Contents 2 Features 3 Consumer Guide to Product Safety 4-5 Knowing your Receiver 6 Knowing Your Camera 7 Installation & Setup 8 Monitor Operation 9-10 Camera Operation 11 Audio/Video & USB Operation 12 Troubleshooting 13 Radio Interference Advice 14 Warranty 15 Notes 16
INTRODUCTION Congratulations on the purchase of the MobiCam Digital DL Monitoring System, which brings you the latest in wireless technology. We are sure that you will be pleased with the quality and features of this product but recommend that you read these instructions carefully before use in order to fully benefit from its many features.
PACKAGE CONTENTS 1 x Receiver Unit 1 x Camera Unit (#70056, additional cameras sold separately) 1 X Receiver Power Cord 1 X Camera Power Cord 1 x AV cable 1 set of mounting screws and anchors NOTE: If you find any of the contents are missing or should you need to order replacement parts, please contact the manufacturer or visit www.getmobi.com.
FEATURES • 2.4” Color High Resolution TFT LCD Display • Voice Activated Picture & Sound with Auto Mute • Audio Only Mode • No installation needed—ready to use • Compact design for easy portability • Transmission range up to 300 ft. • Powerful Night Vision with 20 ft. range • Extra Wide Camera Viewing Angle • Expandable up to 4 Cameras with automatic camera scanning option • Camera operates on AC or 4 AA Alkaline Batteries (not included).
CONSUMER GUIDE TO PRODUCT SAFETY Please read this instruction manual before using your MobiCam Digital DL system. When using electrical appliances, basic safety precautions should always be followed. Please keep safe for future reference. • This product is not intended to be used as a medical monitor and its use should not replace adult supervision. • Periodically examine this product for damage to the cord, housing or other parts that may result in the risk of fire, electric shock or injury.
• Always use transmitter and receiver where there is adequate ventilation. To prevent overheating, keep away from heat sources such as radiators, heat registers, stoves, or other appliances that produce heat. • Use only a dry cotton cloth to keep the Camera and Monitor units free of dust. Do no use a dampened cloth, water, or liquid cleaner of any kind. • Remove the battery from the Monitor during long periods of nonuse as alkaline batteries can leak.
KNOWING YOUR RECEIVER 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
KNOWING YOUR CAMERA 11. 12. 13. 14. 15. 16. 17.
INSTALLATION & SETUP The MobiCam Digital DL Monitor is designed to be powered by either batteries or the AC/DC adaptors. You can also purchase a rechargeable battery pack (item # 70077) available at getmobi.com or retailer to use with your monitor. Using AC/DC adaptor: • Plug the connector of the AC adaptor into the DC Jack on the unit (fig. 9 & 17). • Plug the power cord into an outlet. • Switch the power plug to the ON position (fig.
MONITOR OPERATION Power ON/OFF Use the volume and ON/OFF switch (fig. 7) on the side of the unit to turn On and Off. To adjust the volume use the ON/OFF switch to scroll to the desired level. Channel Selection Press the Mode Button on the front of the monitor 1 time to enter the channel selector mode, use the side “+” and “-” control buttons (see fig. 2) to change the Channel or to set your monitor to Scan mode.
MONITOR OPERATION LCD On/Off Press the Mode Button and hold for 3 seconds until the LCD screen is off. This feature enables you to use the monitor as an audio only system allowing you to conserve power. To deactivate, press the Mode Button for 3 seconds. Brightness Control The brightness on the LCD screen can be adjusted by pressing the Mode button 2 times and using the “+ “& “–“ control buttons (fig. 2) until the desired level is reached.
CAMERA OPERATION Power ON/OFF Use the ON/OFF switch (fig. 16) to turn the unit On and Off. Infrared Night Vision Mode (Automatic) The infra-red night vision mode will switch on automatically during darkness or periods of low levels of light. In this mode only black and white images will be displayed on the monitor. For best image clarity objects should be placed within 20 ft of the camera.
AUDIO/VIDEO & USB OPERATION Audio/Video& USB Output Your monitor is equipped with both an A/V output and USB output so that you can connect your monitor to a TV, DVR, VCR or computer so that you can capture video and sound from the camera transmission. Note: The monitor screen turns off automatically when A/V cable or USB cable is used. The screen will turn back on when the cable is removed. A/V Cable Connection The A/V Output Jack is located on the left side of the monitor (fig. 10).
TROUBLESHOOTING Problem Solution • • • • No Image • • Monitor or Camera has not been turned on. Check AC/DC connection Confirm power outlet is working properly.
RADIO INTERFERENCE ADVICE FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
WARRANTY IC STATEMENT IC STATEMENT: Operation of this device is subject to the following two conditions: 1. 2. this device may not cause interference, and this device must accept any interference, including interference that this device must accept any interference, may cause undesired operation of device. may cause undesired operation of the theincluding device. interference that Mobi Technologies, Inc.
NOTES