Assembly Instructions

ManualsBrandsMOBASE ELECTRONICS ManualsElectronicsUNIT ASSY-IBU(BCM)

Title : NO.

Date

SHT/SHTS : 2/15

Normal

1.1

Produce

Mobase Electronics co.

1.2

Product Model Name

MBECIBUB2109

1.3

Manufacturer name and address

Mobase Electronics co.

100, Saneop-ro 156beon-gil, Gwonseon-gu, Suwon-si, Gyeonggi-do

1.4

Assembly plant address

Mobase Electronics co.

100, Saneop-ro 156beon-gil, Gwonseon-gu, Suwon-si, Gyeonggi-do

Information Document

Summary of content (6 pages)

PAGE 1
Title : NO. Information Document Date SHT/SHTS : 2/15 1. Normal 1.1 Produce Mobase Electronics co. 1.2 Product Model Name MBECIBUB2109 1.3 Manufacturer name and address Mobase Electronics co. 100, Saneop-ro 156beon-gil, Gwonseon-gu, Suwon-si, Gyeonggi-do 1.4 Assembly plant address Mobase Electronics co.
PAGE 2
Title : NO. Information Document Date SHT/SHTS : 3/15 2. Remote Key System Product Description 2.1 Configuration of the remote key system 2.1.1 Folding key: The transmitter is configured in the remote control key, and it transmits a rolling code to the receiver by radio frequency. 2.1.2 Receiver: The receiver receives and decodes the rolling code and operates the actuator. 2.2 remote key performance 2.2.
PAGE 3
Title : NO. Information Document Date SHT/SHTS : 4/15 2.3 Description of remote key system operation ① The transmitter button is pressed. ② The transmitter transmits the code via radio frequency. ③ The receiver decodes the received code. ④ The receiver checks whether the received code is correct or incorrect. ⑤ The receiver receives door lock, unlock, and trunk status as CAN input. Receiver: The receiver receives and decodes the rolling code 2.3.
PAGE 4
Title : NO. Information InformationDocument Document Date SHT/SHTS : 5/15 3. Remote Key System User Manual 3.1 Name: IBU_BCM system - This system includes IBU_BCM and RKE. - BCM and RKE systems enable automatic door lock or unlock or trunk operation in the vehicle. - This IBU_BCM system is installed as *OE ITEM on a motor vehicle. Receiver: The receiver receives and decodes the rolling code *IBU_BCM *RKE 3.2 System structure 3.2.1 Vehicle system ANTENNA ROLLING CODE BATTERY CAN Com.
PAGE 5
Title : NO. Information Document Date SHT/SHTS : 8/15 5. Immobilizer User Manual ① It is a key with a built-in TRANSPONDER and can be used after registering the key. ② If IG is ON with the registered KEY, ICU starts TRASPONDER communication. ③ If there is no normal communication of TRANSPONDER KEY CODE, it is executed up to 5 times. ④ The IBU is normally input with the TRANSPONDER KEY CODE and is sent from the ENGINE ECU.
PAGE 6
FCC warning statement: 15.19 λ. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.105 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.