Product Specs

Title : NO.

Date

SHT/SHTS : 3/12

2. PRODUCT SPECIFICATION

2.1 Scope of RKE, passive entry control, passive start control in SMART Key system.

2.1.1 FOB KEY : It has the functions for passive entry and passive start including

RKE functions. It also has the TP for emergency authentication for passive start

2.1.2 SMART Key system : It is an ECU to control the whole smart key system.

It has the functions such as passive entry control, passive start control,

RKE functions.

2.2 SPECIFICATIONS

2.2.1 FOB KEY

Battery life 2 Year(10Times/Day)(Lithium 3V 1EA)

Electric field strength 10mW (433.92MHz)

Code Rolling Code(Hopping Algorithm)

Operating voltage range DC 2.5 ~ 3.2V

ITEM

SPECIFICATION

Rated supply voltage DC 3V

Operating temperature range

- 10 ~ + 60℃ with Battery

Frequency 433.92MHz

Storage temperature range

- 30 ~ + 85℃ without Battery

Modulation FSK

Information Document

PAGE 1
Title : NO. Information Document Date SHT/SHTS : 3/12 2. PRODUCT SPECIFICATION 2.1 Scope of RKE, passive entry control, passive start control in SMART Key system. 2.1.1 FOB KEY : It has the functions for passive entry and passive start including RKE functions. It also has the TP for emergency authentication for passive start 2.1.2 SMART Key system : It is an ECU to control the whole smart key system. It has the functions such as passive entry control, passive start control, RKE functions. 2.
PAGE 2
Title : NO. Information Document Information Document Date SHT/SHTS : 5/12 3. USER MANUAL 3.1 ITEM : FOB LF system - This system is IBU and inculdes RKE. - RKE in IBU system is intended for auto door lock or unlock or TRUNK in vehicle. - This SMK system is to be installde on motor vehicles as *OE item. *OE : Original Equipment. *IBU : Intergrated Body control Unit *RKE : Remote Keyless Entry. 3.2 SYSTEM CONSTRUCTION 3.2.1 SYSTEM IN VEHICLE Radio Frequency (433.
PAGE 3
U S E R M A N U A L FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.