Installation Guide

RETRACTABLE SCREEN

DOUBLE INSWING

ASSEMBLY AND INSTALLATION INSTRUCTIONS

STEP 4: INSTALLATION

CONFIRM BRICKMOLD SURROUNDS DOOR

The screen unit will be mounted directly to the brickmold on

the outside of the door frame. If there is no brickmold outside

your door frame, you will need to purchase brickmold. This will

ensure that the jamb, head

and sill are ﬂush so that the screen unit will operate smoothly.

See Figure 4A >

POSITION SCREEN

Now move the assembled screen unit up and center it on the

door unit. The sill track should be positioned with the ﬂange on

the back side of the sill track, resting on the outside sill edge.

NOTE: The inside edge of the sill screen track will be mounted

FIG. 4A

FIG. 4B

Ensure brickmold

completely surrounds door

directly onto the sill. See Figure 4B >

Mount sill screen track

directly onto sill

Page 5 of 7