Instructions / Assembly

Page 5 of 5

Step #6

Apply oil-based stain and allow to dry per manufacturer’s instructions. Note: Make sure

all six sides - front, back, edges, top and bottom - receive the same uniform coverage.

Step #7

Apply polyurethane top coat and allow to dry per manufacturer’s instructions. Note:

Make sure all six sides - front, back, edges, top and bottom - receive the same uniform

coverage.

Step #8

Lightly sand (320 Grit Sandpaper) and wipe clean with tack cloth per manufacturer’s

instructions before applying second coat.

Step #9

Apply second coat of polyurethane and allow to dry per manufacturer’s instructions.

Note: Make sure all six sides - front, back, edges, top and bottom - receive the same

uniform coverage.

Step #10

Allow the polyurethane to dry completely before unmasking and installing hardware.