4 Drawer Lateral File Cabinet Installation Instructions A D C C B K I H F J K G E F J G K E F J G K E F J G E
A ×1 B×1 C×2 D×1 step1 Part H insert the Front side panel. A E×4 H F ×4 B Part I insert the back side panel. I G×4 H×1 I ×1 J ×4 M K ×8 L×4 M×42 N×11 O×8 P×3 Q×2 Install the srews, fixed the bottom.
step2 step3 Insert the back plate assembled in the previous step as shown. Take care to distinguish between the top and bottom of the Back Plate.
step4 Tear off the tape, cut the ribbon, and take out the key. step5 Install screws from inside cabinet. M D D Insert the key removed from Step 4 into the lock hole and turn it clockwise 180°. The lock is now open. Make sure that all four corners are in correct place as shown.
step7 step6 Pull the left lock lever up . Q Q Wall Pull the right lock lever up .
step8 L O step9 Bent the drawer to 90° N E E G Bend the buckle. Install the screws. Install the drawer bend the buckle at the bottom position.
step10 step11 Insert Part F from the top direction. J F J F Ensure that the bottom piece of Part F totally insert into the drawer.
step12 step13 K Choose the suitable hole according to the size of the folder. Pull out the two sliding rails at the arrow position of the cabinet completely. Use the left and right slide rails to fix the assembled drawer as shown, then press the drawer to stuck it completely.
step14 step15 Repeat steps 8,9,10,11,12 and 13 to install the remaining three drawers. Note: The pushing of the top drawer will squeeze the spare key. Turn the key 180° counterclockwise and the drawer is locked.
