User’s Guide HD Satellite STB
Contents 1. INTRODUCTION ........2 1.1 Safety Instructions........2 1.2 Packaging Contents........3 1.3 Product Descriptions........4 1.4 Conditional Access........5 1.5 Remote Control........6 1.6 Main Features........7 1.7 Technical Data........7 1.7.1 Basic Features........7 1.7.2 Basic Functions........8 5. MENU........19 5.1 Top Menu........19 5.2 Setup........20 5.2.1 System Settings........20 5.2.2 Service Searching........22 5.2.3 Checking CAM........24 5.2.4 Parental Control........24 5.2.
1. Introduction 1.1 Safety Instructions XP1000 has been designed and manufactured in compliance with EU consumer safety requirements (CE). Please read the following safety precautions carefully 1. Connecting Power • This product operates only in the range of AC 100V~250V and 50Hz/60Hz. Please check first your power supply to see if it fits in this range. • Please be noted that you need to disconnect from the mains before you start any maintenance or installation procedures.
11. Battery • There is danger of explosion if batteries are incorrectly replaced. • Replace batteries only with the same or equivalent type. Disposal “WEEE” Symbol instructions This product should not be disposed with other house hold wastes at the end of its working life. Please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. This will help prevent harm to the environment or human health from uncontrolled waste disposal. 1.
1.3 Product Descriptions Front Panel 1 2 3 4 5 6 1. IR Receiver: Receive the IR signal from remote controller. 2. Recording Indicator: Display the current recording status of STB. 3. On/Off button and Indicator: Display the current power status of STB. Using this button, you can power on and off your STB. 4. Channel up/down: Using the channel up and down buttons, you can switch the channels directly on your STB. 5. CI Module slot: One CI module slot is provided. 6.
1.4 Conditional Access Amongst the channels scanned via XP1000, some channels can be properly tuned in only with the corresponding Smartcard and/ or CAM (Conditional Access Module). XP1000 provides two Smartcard Reader slots and one Conditional Interface slot. Users need to purchase those Smartcards and CAMs that are required for viewing such subscription based services. Insertion of Smartcard 1 Open the door on the right side.
1.5 Remote Control Power Press to turn the product on or standby. STB Press to switch the remote control to control this product. TV Press to switch the remote control to control TV set. Next Press to go to Next Page. Numeric Keys Press to enter a channel number or numbers according to the menu options. Info Press to view the Program information. Previous Press to go to Previous Page. OK Press to confirm the selected menu option. Back Press to return to the previous service or Menu.
1.6 Main Features • MIPS Processor 3300 class • Linux Operating System • Media Player • Downloadable Plug-ins supported • 2 x Smartcard Readers • 1 x Common Interface • MPEG2 / H.264 Hardware Decoding • DVB-S2 Single Tuner • 128MB NAND Flash / 512MB DDR Memory • 10/100MB Ethernet Interface • 1 x USB 2.
Packaging Gift box Paper box, coloured design Accessories RCU Yes HDMI Cable Yes AC Adaptor (+12V/2.5A) Yes Battery (AAAx2) Yes User Manual Guide Yes 1.7.2 Basic Functions Solution CPU MIPS 3300 class RAM 512MB ROM SPI-NOR 4MB NAND 128MB OS Linux version > 3.5.0 Audio Decoder Dolby Digital (AC3) Yes MPEG-1 L1/L2/L3 Yes MPEG-2 AAC Yes MPEG-4 HE-AAC Yes Digital multi-lingual Yes Video Decoder MPEG-1 Yes MPEG-2 MP@HL H.
Control I/F Front keypad 3Keys – Power, Ch+, Ch- IR Yes AV Input/Output SCART output Yes (CVBS & RGB + LR) HDMI output x1 SPDIF optical output Yes USB 2.0 x1 Copy Protection HDCP Yes Network LAN RJ45(10/100 Base-T) W-LAN Wi-fi (802.11 b/g),USB type (optional) DHCP, Static IP Yes PPPoE Optional Other Functions Volume & Mute Control Yes Photo viewer Yes 2. INSTALLATION OF XP1000 This chapter will guide you through the whole installation process of XP1000.
2.1.1 Connecting TV via HDMI cable For the sake of the best picture quality, especially for digital TV, HDMI connection is recommended. Most HDTVs have HDMI connectors to ensure the highest picture quality. In the rear panel of XP1000 one HDMI connector is available for this purpose. Connect your TV to XP1000 using an HDMI cable as follows. HDMI Cable HDMI 2.1.2 Connecting TV via SCART Cable In case your TV is analogue TV, SCART cable is the most common method.
2.3 Power On/Off [ : Press Power key / Press MENU > Select Standby/Reset] There are several ways to turn your XP1000 ON or OFF. * Complete Power Shutdown There is a Power Switch in the rear panel and once it is ON, you do not need to turn it on or off each time. It takes a longer time to boot the system if you turned it off by this switch. * Standby Mode POWER key is normally used to turn the power of XP1000 on or off. If you press POWER, it instantly switches your XP1000 off or on.
4. BASIC OPERATIONS 4.1 Switching Channels NOTE: If channel change is not done, it is probably because the selected channel is encrypted and you do not have a proper smartcard. [ : Press▲/▼, CHANNEL +/- key / Press ◀/▶ to move to the next channels] XP1000 offers various channel zapping methods. You can switch the current channel by pressing • UP/DOWN key If you press UP or DOWN key, Channel Selection menu appears.
4.3 Selecting Audio Track [ : Press AUDIO key] You can check what audio tracks are available to choose by pressing AUDIO key. By using UP/DOWN key and Colour key, you can select a different audio language or Stereo sound. NOTE: Available options on this menu will differ depending on the service. 4.4 Subtitle [ : Press SUBTITLE key] You can view the subtitle of the current program if the program provides the subtitle. Press SUBTITLE key, Subtitle selection menu appears as below.
4.6 Program Information [ : Press INFO key] Whenever you change the channel, infobar is always displayed for 5 seconds (default setting). Infobar is designed to provide you comprehensive information of the channel that you are currently watching. 4.7 Info Bar • Press OK to call up infobar. 4.8 Electronic Program Guide (Event View) [ : Press EPG key] Electronic Program Guide (EPG) displays the program information of each channel, if provided, in time and date order.
- Name Displays the name of the selected program. - Description Displays a short description of the selected program. - Timer Type • Select Zap for channel tuning reservation. • Select Record for recording reservation. - Repeat Type • Select Once for one time of zapping or recording reservation. • Select Repeated for repeated zapping or recording reservation. • Repeats - This option is given only when you selected “Repeated” in the Repeat Type.
4.9 Time Shift [ : Press key] For your information, Timeshift is an instant recording of the current program that you are watching. Press , it will instantly pause the audio and video of the program, and a small window displaying elapsing time information will appear on the left upper side of the screen as below. In this state, Timeshifted recording is running until you press either PLAY or PAUSE again. You can restart viewing of the program.
2 Recording by Timer You can manage recording process using Timer List menu. Press MENU and select Timer on the menu. In this menu, color keys are assigned for each different function. - RED (Delete) This option is used to delete a timer. - GREEN (Add) This option is used to add a timer. - YELLOW (Disable) This option is used to disable the timer and X mark will appear. [ NOTE: if you want to enable the disabled timer, press YELLOW again.
4.12 Managing Recording Files [ : Press FILE LIST key > Press MENU key] If you want to delete a recording file, press MENU key while Recorded file menu is on. Select “Delete” and confirm OK to delete. 4.13 Media Player [ : MENU > Plugins > Media Player] XP1000 is a multimedia receiver capable of playing media contents. Using Media Player, you can enjoy Music, Photo and Video contents stored on the external HDD and/or a USB memory stick plugged into XP1000.
4.15 Sleep Timer [ : MENU > Power Management > Sleep Timer] You can set a specific time when your XP1000 goes into Standby mode or Deep Standby mode, using this menu. Three colour keys are used to set up this sleep timer. 1 RED This option is used to enable or disable Sleep Timer. 2 GREEN This option is used to choose between Standby mode and Deep Standby mode. 3 YELLOW This option is used to choose whether to be asked of confirmation before system shutdown.
5.2 Setup Setup menu consists of the following sub-menus. 1 System Settings 2 Service Searching 3 Common Interface 4 Parental Control 5 Factory Reset 6 Software Update 5.2.1 System Settings 5.2.1.1 Audio/Video [ : MENU > Setup > System Settings > Audio/Video] Here you will find options necessary to set up the audio and video configuration of your XP1000. NOTE: RED is for cancel and GREEN is for OK. OK key of RCU is not working in this mode.
5.2.1.3 Network Setup [ : MENU > Setup > System Settings > Network Setup] XP1000 is integrated with standard 10/100Mbps Ethernet with RJ 45 connector standard. You are recommended to use this network capability of XP1000 to fully enjoy the system. You can set up the network settings through this Network Configuration menu. In the Network Configuration menu, you will see five sub menus as follows: 1 Adapter settings Use Interface YES is used to activate the Ethernet.
5.2.1.6 Hard Disk Set Up [ : MENU > Setup > System Settings > Hard drive > Hard drive Setup] You can set the duration of time after which HDD is to be put into standby mode. Here, you can choose from No standby to various duration. Once you set this option, press GREEN key to confirm the change. 5.2.2 Service Searching 5.2.2.1 Tuner Configuration [ : MENU > Setup > Service Searching > Tuner Configuration] If you run the First Time Installation process, the Tuner A is already configured. 5.2.2.
5.2.2.3 Manual Scan [ : MENU > Setup > Service Searching > Manual Scan] If you know well enough to configure each exact setting required for manual search of services, you can do manual scan as well. There are many parameter values that you need to decide as below. Amongst other things, the below parameters are what you need to decide prior to performing manual scan. 1 Tuner You need to decide which tuner you want to use for manual scan.
5.2.3 Checking CAM [ : MENU > Setup > CI > Common Interface] To be able to watch CAS channels, you need to have a proper CAM and a Smartcard. XP1000 is integrated with a Common Interface slot and two Smartcard slots. If you have inserted CAM, you can check the information of the inserted CAM, through this menu as below: 5.2.4 Parental Control [ : MENU > Setup > Parental Control] If you want to prevent certain channels from being accessed by others, you can do so using this menu.
Change service pin Here you can define a PIN code required to change services to be included in the parental control list. NOTE: PIN code here is used for Change service and thus you are recommended to use a PIN code different from that used for Protect services. 5.2.5 Factory Reset [ : MENU > Setup > Factory Reset] If you want to erase all installed service list as well as all configurations, run the Factory Reset process. Select YES in the below menu to run the factory reset.
5.3 Information 5.3.1 Service Information [ : MENU > Information > Service] In this menu, you can see the service information of the current channel such as service name, service provider and video format & size. 5.3.2 Checking H/W & S/W Information [ : MENU > Information > About] This menu is for you to check the current system of your XP1000. You can see the following information: 1 S/W version 2 Detected NIMs for Tuner A 3 Detected HDD 6.
6.1.2 Smart Scan Method 1. Power on TV using TV power button or TV remote control. From this step all further remote controls should be done using the universal remote control and the remote control should be directed towards the TV. 2. Press and hold the TV button more than 3 seconds. Then, two LED lamps from TV and STB buttons are flickering. Release the TV button. Then, LED lamp from the TV button is flickering. 3. Press ▲ (up) or ▼ (down) button until TV turns off. 4.
6.1.3.3 Master Power Master Power Reset: - In TV mode, power button is only working for TV power. - In STB mode, they are only working for STB power. Master Power Set: - Power button is working both for TV and STB power. How to reset Master Power 1. Press and hold the STB button more than 3 seconds to enter STB setting mode. 2. Press and release POWER ( ) button. STB LED lamp will be turned off. 3. Press and release STB button. 4. Press and release POWER ( ) button. Then STB LED lamp will flicker 3 times.
Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors’ reputations. Finally, any free program is threatened constantly by software patents.
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11.
Inhalt 1. EINFÜHRUNG............................................................................. 34 1.1 Sicherheitshinweise.................................................................. 34 1.2 Verpackungsinhalt................................................................... 35 1.3 Produktbeschreibungen....................................................... 36 1.4 CI-Slot für Common Interface Module............................. 37 1.5 Fernbedienung.....................................................
1. EINFÜHRUNG 1.1 Sicherheitshinweise XP1000 wurde gemäß den Anforderungen der Europäischen Union für Verbrauchersicherheit entworfen und gefertigt. Bitte lesen Sie die folgenden Sicherheitshinweise sorgfältig durch. 1. Anschließen der Stromversorgung • Dieses Produkt arbeitet ausschließlich im Bereich von AC 100V ~ 250V und 50Hz/60Hz. Bitte überprüfen Sie zuerst Ihre Stromversorgung ob es in diesem Bereich passt.
11. Batterie • Achten Sie bitte darauf, dass die Batterien Ihrer Fernbedienung keiner Hitze ausgesetzt werden dürfen, da sie sonst explodieren könnten. • Ersetzen Sie die Batterien nur durch denselben oder einen gleichwertigen Typ. 12. Entsorgungshinweise Dieses Produkt darf am Ende seiner Lebensdauer nicht über den normalen Haushaltsabfall entsorgt werden, sondern muss an einem Sammelpunkt für das Recycling von elektrischen und elektronischen Geräten abgegeben werden.
1.3 Produktbeschreibungen Vorder Ansicht 1 2 3 4 5 6 1. IR-Empfänger: Empfang der IR-Signal von der Fernbedienung. 2. Recording-Anzeige: Zeigt den aktuellen Aufnahmestatus STB. 3. On / Off-Taste und Anzeige: Zeigt den aktuellen Status der Stromversorgung des Recseiver an. Mit dieser Taste können Sie Ihren Recseiver ein-und ausschalten.. 4. Kanal nach oben / unten: Mit der Kanal rauf und runter-Tasten können Sie die Kanäle direkt auf Ihrem Receiver schalten. 5.
1.4 CI Slot: für Common Interface Module. Mit dem XP1000 können Kanäle nur mit der entsprechenden Smart Card und / oder CAM (Conditional Access Module) angesehen warden. XP1000 bietet zwei Kartenleser -Steckplätze und einen Conditional Interface Slot. Benutzer müssen diese Smartcards und CAMs die für die Abo-basierten Dienste erforderlich sind erwerben. Einsetzen der Smartcard 1) Öffnen Sie die Tür auf der rechten Seite.
1.5 Fernbedienung Power Standby-Taste schaltet Ihre XP1000 ein bzw. aus. STB Drücken sie diese Taste um die Fernbedienung einzuschalten, um den recseiver zu kontrollieren. TV Schaltet Ihre Fernbedienung in den TVFernbedienungs-Modus, um Ihren einprogrammierten Fernseher bedienen zu können Next schaltet zwischen den letzten 20 gesehenen Kanälen um Zifferntaste Drücken Sie, um einen Kanal oder mehrere Nummern nach den Menüoptionen einzugeben.
1.6 Hauptmerkmale • MIPS Processor 3300 class • Linux Operating System • Media Player • Downloadable Plug-ins unterstüzung • 2 x Smartcard Readers • 1 x Common Interface • MPEG2 / H.264 Hardware Decoding • DVB-S2 Single Tuner • 128MB NAND Flash / 512MB DDR Memory • 10/100MB Ethernet Interface • 1 x USB 2.
Zubehör Fernbedienung Ja HDMI Kabel Ja SCART Kabel Nein Netzwerkkabel Ja AC Adaptor (+12V/2.5A) Ja Batterien (AAAx2) Ja Verpackung Karton Papierkarton, farbig bedruckt 1.7.2 Basic Grundfunktionen Solution CPU MIPS 3300 class RAM 512MB ROM SPI-NOR 4MB NAND 128MB OS Linux version > 3.5.0 Audio Decoder Dolby Digital (AC3) Ja MPEG-1 L1/L2/L3 Ja MPEG-2 AAC Ja MPEG-4 HE-AAC Ja Digital multi-lingual Ja Video Decoder MPEG-1 Ja MPEG-2 MP@HL H.
Control I/F Front Tasten 3 Tasten – Power, Ch+, Ch- IR Ja AV Input/Output SCART Ausgang Ja (CVBS & RGB + LR) HDMI Ausgang Ja SPDIF optical Ausgang Ja USB 2.0 x1 Kopierschutz HDCP Ja Netzwerk RJ45 10/100 Base-T Wi-fi (802.11 b/g) USB type (optional) DHCP, Static IP Ja PPPoE Optional Sonstige Funktionen Volume & Mute Control Ja Photo viewer Ja 2. INBETRIEBNAHME DES XP1000 Dieses Kapitel wird Sie durch die gesamte Installation von XP1000 führen.
2.1.1 Anschluss am Fernsehgerät über HDMI-Kabel Um Höchste Bild/Ton Qualität für das digitale Fernsehen zu gewährleisten, wird eine HDMI-Verbindung empfohlen.Die meisten HDTVs haben HDMI-Anschlüsse um höchste Bildqualität zu gewährleisten. Auf der Rückseite des XP1000 ist ein HDMI-Anschluss für diesen Zweck zur Verfügung gestellt. Verbinden Sie Ihren Fernseher und den XP1000 mit einem HDMI-Kabel wie folgt. HDMI Cable HDMI 2.1.
2.3 Ein/Aus Es gibt mehrere Möglichkeiten, um Ihren XP1000 an EIN oder AUS schalten. * Vollständige Abschaltung Es ist ein Netzschalter an der Rückseite angebracht sobald sie diesen aktiviert haben ist das Gerät komplett ausgeschalten. Wenn Sie das Gerät dann wider einschalten, kann es einen Moment dauern bis das System booten. * Standby-Modus Wenn Sie die Power-Taste auf der Fernbedienung drücken, wird der XP1000 an-oder ausgeschalten.
4. GRUNDLEGENDE BEDIENUNG 4.1 Programmwahl HINWEIS: Wenn der Kanalwechsel nicht gemacht wird, ist es wahrscheinlich weil der gewählte Kanal verschlüsselt ist und Sie nicht über eine ordnungsgemäße Smartcard verfügen. [ : drücken ▲/▼, Kanal +/- Tasten ◀/▶um zum nächsten Kanälen zu wechseln] XP1000 bietet verschiedene Zapping Methoden. Sie können den aktuellen Kanal durch Drücken von • Kanal hoch/runter Wenn Sie die UP oder DOWN-Tasten drücken, erscheint Kanalauswahl-Menü.
4.3 Änderung der Audiosprache [ : drücken Sie die AUDIO Taste] Durch drücken der Audio Taste können Sie überprüfen, welche Audio-Signale verfügbar sind. Durch die Verwendung von UP / DOWN-Taste und den FarbeTasten , können Sie eine andere Sprache oder Stereo-Sound wählen. HINWEIS: Die verfügbaren Optionen in diesem Menü sind je nach Dienst unterschiedlich 4.
4.6 Programminformationen [ : drücken Sie INFO ] Wenn Sie den Kanal wechseln, wird die Infobar immer für 5 Sekunden (Standardeinstellung) angezeigt. Die Infobar ist so konzipiert, um Ihnen umfassende Informationen über den Kanal zugeben den Sie gerade ansehen. 4.7 Info Bar • Drücken Sie OK um die Info Bar aufzurufen. 4.8 Electronic Program Guide (EPG-Programmführer) [ : drücken Sie EPG ] Electronic Program Guide (EPG) zeigt das Programm zu jedem Kanal an, falls diese Daten vorhanden sind.
- Name Zeigt den Programmnamen an. - Beschreibung Zeigt eine kurze Beschreibung des ausgewählten Programms. - Timer Art • Wählen umschalten für Kanal wechsel. • Wählen Sie aufnehmen für die Aufnahme. - Art der Wiederholung • Wählen Sie einmal für eine Zeit des Umschaltens oder der Aufnahme . • Wählen Sie wiederholen für wiederholts Umschalten oder Aufnehmen . • Wiederholung - Diese Option ist nur, wenn Sie “Wiederholtung” gewählt haben. Sie können die Art der Wiederholung angeben.
4.9 Time Shift (Zeitversetztes Fernsehen) [ : drücken Sie die Taste] Zu Ihrer Information, mit Timeshift starten Sie eine sofortige Aufnahme des aktuellen Programms, das Sie gerade sehen. Erneutes drücken wird die Aufnahme des Programmes sofort anhalten und ein kleines Fenster, indem die verstrichene Zeit und Informationen stehen wird auf der linken unteren Seite des Bildschirms angezeigt, wie oben dargestellt. Timeshift-Aufnahme läuft, bis Sie entweder PLAY oder PAUSE erneut drücken.
2. Aufnahme durch Timer [ : drücken Sie MENU > wählen Sie Timer] Sie können Aufnahmeprozess in der Timerliste verwalten. Drücken Sie MENU und wählen Sie Timer auf der Menüseite. In diesem Menü werden Farbtasten für jede andere Funktion zugewiesen. - Rot (löschen) Diese Option wird verwendet, um einen Timer zu löschen. - Grün (hinzufügen) Diese Option wird verwendet, um einen Timer hinzuzufügen. - Gelb (Deaktivieren) Diese Option wird verwendet, um den Timer zu deaktivieren und eine X Markierung erscheint.
4.12 Hauptaufnahme Dateien [ : Drücken Sie die FILE LIST-Taste> MENU Taste drücken] Wenn Sie eine Aufnahme Datei löschen möchten, drücken Sie FILE LIST Taste um alle aufgezeichneten Datein zu sehen und wählen sie ihre datei aus. Drücken Sie dann die Menü Taste und wählen Sie “löschen” und bestätigen Sie dieses mit OK. 4.13 Media Player [ : MENU > Plugins > Media Player] XP1000 ist ein Multimedia-Receiver der in der Lage ist Medieninhalte abzuspielen .
4.15 Sleep Timer [ : MENU > Standy/Neustart > Ausschalt Timer] Sie können eine bestimmte Zeit auswählen nach der Ihr Recseiver in den Standby-Modus oder Deep Standby Modus über geht. Vier farbige Tasten dienen zur Einstellung dieser Sleep-Timer. 1 2 3 4 Rot : Diese Option dient zum aktivieren oder deaktivieren des Sleep Timer. Grün :Diese Option wird verwendet, um zwischen Standby-Modus und Deep Standby Modus zu wählen.
5.2 Setup Das Setup-Menü besteht aus folgenden Untermenüs. 1 System Einstellungen 2 Kanalsuche 3 CI Einstellungen 4 Jugendschutz 5 Werkseinstellungen 6 Software aktualisieren 5.2.1 System-Einstellungen 5.2.1.1 Audio/Video [ : MENU > Setup > System Einstellungen > Audio/Video] Hier finden Sie die notwendigen Optionen , der Audio-und Video-Konfiguration Ihres XP1000 . HINWEIS: ROT ist für Abbrechen und Grün steht für OK. Die OK-Taste der Fernbedienung hat in diesem Modus keine funktion.
5.2.1.3 Netzwerkeinstellungen [ : MENU > Setup > Systemeinstellungen > Netzwerkeinstellungen] XP1000 ist mit Standard 10/100Mbps Ethernet mit RJ-45Anschluss serienmäßig integriert. Es wird empfohlen, diese Netzwerkfähigkeit zu verwenden, um voll und ganz das System genießen zu können. Stellen Sie die Netzwerkeinstellungen über dieses Menü Netzwerkkonfiguration ein.
5.2.1.6 Festplatten Einstellung [ : MENU > Setup > Systemeinstellung > Festplatte > Festplatten Einstellung] Sie haben nun die Möglichkeit einzustellen, nach wieviel Minuten Aktivität der Festplatte, sich diese in den StandbyModus schalten soll. Als Optionen stehen zur Verfügung: • Kein Standby • 10 oder 30 Sekunden • 1, 2, 5, 10, 20 oder 30 Minuten • 1, 2 oder 4 Stunden 5.2.2 Sendersuche 5.2.2.
5.2.2.3 Manueler Scan [ : MENU > Setup > Sendersuche > Manueler Scan] Wenn Sie jede genaue Einstellung für die manuelle Suche kennen, können Sie den manuellen Scan durchführen. Es gibt viele Parameter Werte die Sie brauchen um wie unten zu entscheiden. 1 Tuner Sie müssen entscheiden, welcher Tuner Sie zum manuellen Scan verwenden möchten. 2 System-Einstellungen Hier haben Sie zwei Optionen zwischen DVB-S (SD) und DVB-S2 (HD).
5.2.3 Überprüfen CAM [ : MENU > Setup > Softcam/CI > CI Modul] Um CAS Kanäle zu sehen benötigen Sie eine ordnungsgemäße CAM und eSmartcard . XP1000 ist mit einem Common Interface Slot und zwei Smartcard-Slots ausgerüstet. Wenn Sie das CAM eingesteckt haben, können Sie die Informationen vom eingesetzten CAM, über dieses Menü wie folgt sehen: 5.2.4 Jugendschutz [ : MENU > Einstellungen > Jugendschutz] Wenn Sie bestimmte Kanäle sperren möchten, können Sie dies in diesem Menü.
Pin Code ändern Hier können sie den voreingestellten PIN Code ändern.. 5.2.5 Werkseinstellungen [ : Menü > Einstellungen >Werkseinstellungen ] Wenn Sie alle installierten Service-Liste sowie alle Konfigurationen löschen möchten, führen Sie den Werkseinstellung durch. Wählen Sie JA im darunter liegenden Menüum die Werkseinstellung auszuführen. Nach Abschluss des Werkseinstellung, wird Ihr XP1000 automatisch neu gestartet und die Erstinstallation kann wider durch geführt werden.
5.3 Information 5.3.1 Service Information [ : MENU > Information > Service] In diesem Menü können Sie die Service-Informationen des aktuellen Kanals, so wie Service-Namen, Service-Provider und Video-Format und Größe abrufen. 1 2 3 4 Kanal PIDs Multiplex Tuner Status 5.3.2 Überprüfen H / W & S / W Informationen [ : MENU > Information > Über] Dieses Menü ist für Sie damit sie die aktuelle Systemversion des XP1000 überprüfen können.
7. COPYRIGHT – GNU GPL GNU General Public License Deutsche Übersetzung der Version 2, Juni 1991 Copyright © 1989, 1991 Free Software Foundation, Inc. 51 Franklin St, Fifth Floor, Boston, MA 02110, USA Es ist jedermann gestattet, diese Lizenzurkunde zu vervielfältigen und unveränderte Kopien zu verbreiten; Änderungen sind jedoch nicht erlaubt.
§1. Sie dürfen auf beliebigen Medien unveränderte Kopien des Quelltextes des Programms, wie sie ihn erhalten haben, anfertigen und verbreiten. Voraussetzung hierfür ist, daß Sie mit jeder Kopie einen entsprechenden Copyright-Vermerk sowie einen Haftungsausschluß veröffentlichen, alle Vermerke, die sich auf diese Lizenz und das Fehlen einer Garantie beziehen, unverändert lassen und desweiteren allen anderen Empfängern des Programms zusammen mit dem Programm eine Kopie dieser Lizenz zukommen lassen.
3. Liefern Sie das Programm zusammen mit dem schriftlichen Angebot der Zurverfügungstellung des Quelltextes aus, das Sie selbst erhalten haben. (Diese Alternative ist nur für nicht-kommerzielle Verbreitung zulässig und nur, wenn Sie das Programm als Objectcode oder in ausführbarer Form mit einem entsprechenden Angebot gemäß Absatz b erhalten haben.) Unter dem Quelltext eines Werkes wird diejenige Form des Werkes verstanden, die für Bearbeitungen vorzugsweise verwendet wird.
geleistet; es liegt am Autor/Geber, zu entscheiden, ob er die Software mittels irgendeines anderen Systems verbreiten will; ein Lizenznehmer hat auf diese Entscheidung keinen Einfluß. Dieser Paragraph ist dazu gedacht, deutlich klarzustellen, was als Konsequenz aus dem Rest dieser Lizenz betrachtet wird. §8.
8. FEHLERBEHEBUNG Problem Keine Anzeige auf dem Display des Receivers Lösung • Prüfen Sie das Stromanschlusskabel des Receivers auf Beschädigungen. Prüfen Sie, ob das Kabel in eine Steck-dose eingesteckt ist, die unter Spannung steht. • Prüfen Sie, ob der Hauptschalter auf der Rückseite des Receivers auf ‘ON’ steht. Kein Bild • Prüfen Sie die Punkte, die unter ‘Keine Anzeige auf dem Display des Receivers’ stehen.
APPENDIX/ANHANG AOC 4523 4648 A.R.
Bigston Black Diamond Black Star 3637 5319 8033 3840 6896 7837 3036 5531 Black Strip 6482 3802 5510 Black Way 5896 4016 Blaupunkt 3518 6640 5265 6538 7839 5186 7014 4849 6812 Blue Sky 8644 8060 3840 6230 5355 6381 2499 6896 4016 5896 7014 7733 4156 7361 6685 4648 Blue Star 5896 Bondstec 5531 Boots 7647 Bosch 7839 BPL 8644 6896 5896 Brandt 4884 7430 4422 3270 6982 3847 Brandt Electronique Brend Star Cihan 4648 Cimline 7647 4016 3637 Cinex 3451 5952 Circuit City 4523 3802 5874 C
Electro Tech Daytek 2924 4979 8435 4698 Dayton 4979 Daytron 7647 5090 8644 6896 4523 3637 DEC 4167 7314 5397 3637 Electrobrand 5874 Electrohome 4523 3802 5874 Electronika 4648 Decca 8568 8644 6896 6286 7733 4648 Elekta 7647 8644 6896 3488 5896 3637 de Graaf 7910 5605 4783 2438 Elfunk 3573 3840 Deitron 8644 6896 5090 4016 ELG 8644 6896 Denko 3488 Elin Denver 8644 6896 6305 4485 8299 3637 DER 6127 Desmet Elite 8644 6896 7647 3637 4648 4016 8644 6896 4523 3802 5510 4648 Diamant
Fisher 6812 7910 7287 3350 5605 3802 Gradiente 4638 4849 8644 6896 Flint 8644 6896 2696 4016 7014 3488 4648 Gradin 3637 4648 Force 7660 Graetz Forgestone 6127 Formenti 5605 8644 6896 2590 4469 4648 FormentiPhoenix Fortress 3193 4523 3802 Grandin Fraba 8644 6896 7287 Friac 7647 8644 6896 7287 4874 2696 Frontech 5531 3488 2438 7647 5605 3637 Fujimaro 4677 Fujitsu Fujitsu General Fujitsu Siemens Funai 3451 Grenadier 3637 Gronic 5605 7647 5605 Grundig 5265 4679 6640 3518 8435 68
Hisawa 6685 3952 Hitachi 4783 7040 4819 8374 Hitachi Fujian 5620 Hitsu 7647 7910 6069 5620 5393 6753 7660 3952 Intervision 4889 4659 8568 4737 3802 6812 5605 6972 3350 5874 6896 6982 4874 3835 4648 7430 6619 8644 8020 2438 5295 6286 3840 2696 7014 4016 HMV 6127 Höher 8060 5952 4677 Home Electronics Horizont International 5896 4016 7014 2696 7733 8060 Hisense 8644 6896 4648 Hoshai 4016 7014 5896 Huanyu 5090 4469 Hugoson 3094 7855 Hygashi 4469 Hyper 7647 4469 5531 3637 4648 Hypers
Kobic 3637 Kobra 2519 Kolster 8644 6896 5531 4016 4648 Konichi 7647 3637 Konka 6230 Korpel 8644 6896 4648 Korting 7287 Kosmos 8644 6896 Kotron 6764 3488 Koyoda 7647 KTV 4523 3802 5874 Kuasho Kuba Kyoto L&S Electronic LaSAT Luxor 2438 8644 6896 8377 5605 3350 3488 5301 4648 8644 7647 6896 5319 2438 8020 6753 6092 4659 3840 8394 3350 7910 4783 5605 LXI 5393 4648 M Electronics 3637 4648 Macys 4523 3802 Madison 8644 6896 5531 8568 5605 3637 4648 Magnafon 4523 4648 4648 8568 4469 53
Merritt Metz Netsat 4783 3350 5605 2769 6975 5313 2410 8644 6896 8299 5355 5319 5265 6640 3518 3840 7324 Neufunk 8644 6896 8644 7647 6896 2696 4016 5896 8060 8644 7647 6896 6982 3637 4648 MGA 5393 8644 6896 4016 New World 4016 Micromaxx 8644 6896 5355 3840 7361 Nicamagic 4469 Microstar 7361 MicroTEK 8033 Midland 4523 Nikkei Mikomi 8060 7660 Nikko Minato 5393 8644 6896 Nissan Minerva 5510 6230 6640 5265 4265 3518 8568 5620 Noblex Minoka 3637 6764 8644 6896 4648 Nobliko 426
Merritt Metz Netsat 4783 3350 5605 2769 6975 5313 2410 8644 6896 8299 5355 5319 5265 6640 3518 3840 7324 Neufunk 8644 6896 8644 7647 6896 2696 4016 5896 8060 8644 7647 6896 6982 3637 4648 MGA 5393 8644 6896 4016 New World 4016 Micromaxx 8644 6896 5355 3840 7361 Nicamagic 4469 Microstar 7361 MicroTEK 8033 Midland 4523 Nikkei Mikomi 8060 7660 Nikko Minato 5393 8644 6896 Nissan Minerva 5510 6230 6640 5265 4265 3518 8568 5620 Noblex Minoka 3637 6764 8644 6896 4648 Nobliko 426
OTF Otto Versand President 3637 3802 3637 5874 7350 3518 3350 7430 3001 6736 6812 3193 3835 5531 7647 5896 6982 8644 6896 6640 5265 8568 OVP 4648 Pace 7733 Pacific 8644 6896 6286 8060 3840 5119 Pael 4469 Palladium Palsonic 7287 8644 2620 8060 5553 6896 5531 7839 6286 3518 6736 6538 5605 7350 2438 4648 Prima 7314 7647 3488 6764 7789 4523 3802 5510 3637 4648 Princess 2924 3637 Prinston 3840 Prinz 3350 Proelco 4648 Profex 7647 5605 3350 2438 3637 Profi 7647 Profitronic 8644 6896 46
Revox/Studer 4648 Rex 2438 2620 5531 5605 3488 RFT 7287 3488 8644 6896 2590 Rhapsody 4469 Scotland 5605 Scott 4485 5393 4523 3802 5874 Sears 5393 Seaway Rice Club 5295 5510 Seelver Ricoh 6896 3840 8644 8644 6896 Rinex SEG 2335 5553 R-Line 8644 6896 5605 RMB 4523 Roadstar 8644 6896 3840 4917 8377 4469 5319 4016 5355 6230 7647 5605 2499 3634 8060 3637 3488 5295 6812 5531 4523 3802 SEI Rodex 8644 6896 6736 5605 8568 8644 6896 Sei-Sinudyne 8568 6736 8644 6896 5874 4648 Seitech 7855 R
Sonawa 4016 Tashiko Soniko 8644 6896 Tatung Soniq 2519 Sonitron 7910 7287 6559 Sonneclair 8644 6896 Sonoko 8644 6896 7647 3488 3637 5896 4648 Sonolor 7910 5605 6736 4783 3350 5896 Sontec 8644 6896 7287 7647 4648 Sony Sound & Vision Soundesign TCM 6736 2762 7507 6219 3193 4849 4752 5874 3078 6812 8644 6896 3802 4016 5090 8644 6896 4523 3802 5510 5874 5393 Soundmaster 3637 Soundwave 8644 6896 5553 6381 Soyea 2335 Teac Teak TEC 6812 4849 4469 5605 2438 3802 5952 8644 6896 8568 7507 7733
Tesla Orava Tevion 4648 United 7350 4706 5905 3191 3451 5355 6286 8060 8644 5952 6896 7361 3840 4596 3730 Universal Texet 5090 7647 4469 4016 Thomas 4523 5510 3637 5874 4648 Thomson Thorn ThornFerguson 4884 3847 6982 4422 7430 3270 8644 6896 4469 5620 6127 7430 5301 8644 6896 7507 3270 3952 6982 3350 6736 3835 6812 5090 6482 4752 6634 4874 6640 4265 3802 5620 7430 6127 3350 3270 4874 5301 6482 Tiny 3453 7789 5393 5510 Tobishi 4016 Tobo 3637 Tokai 8644 6896 5355 5605 5090 7647 3840 4648 38
United Universal Universum 8060 8644 6381 6896 7733 3840 8299 7066 8644 6896 6092 5186 7430 7647 3840 6896 4819 6640 8377 6634 4917 7660 5265 3350 8020 3634 4849 2517 Univox 8644 6896 5605 Uranya 3637 Utax 5605 V7 Videoseven Vanguard 4659 5531 7287 7507 5319 3637 2620 6753 6538 8644 4265 4648 4752 6736 5553 3835 5605 7839 5355 8394 6812 3488 5991 5393 3118 4698 7855 3637 Veco 3637 Vestel 8644 5605 6896 5355 3840 5319 4648 Vexa 7647 8644 6896 3637 4648 Victor 4638 Video System 4648 Vid
Specifications and features are subject to change without notice. Product may not be exactly the same as shown.