Thermal Security System Application scenario Suitable for office areas, hotels, access gates, office buildings, schools, shopping malls, shops, communities, public service and management projects and other places where face access control is required. Type SAFETEC V1,SAFETEC V1-D ,SAFETEC V1-K, SAFETEC V1-O,SAFETEC V1-W Product Features 1. Support camera to capture face to activate device; 2. Supports serial port, Wiegand 26, 34 input and output; 3.
algorithm; 4. Support device local storage of 10,000 face libraries; 5 . When the face database is 3,000 , misrecognition rate is 3 in 10,000, 1: N recognition accuracy rate is 99.
6. Fast recognition speed: (a) face tracking and detection takes about 20ms, (b) face feature extraction takes about 200ms, (c) face comparison takes about 0.2ms(1000 people database, multiple identification to get the average), 0.5ms(10,000 face database,multiple identification to get the average); 7. Binocular with infrared fill light camera; 8. Support live photo saving during face recognition or stranger detection; 9. Support HTTP Interface connection; 10.
Horizontal angle pa Core ramet ers CPU 4 cores, 1.8GHz Device interface 2GB memory, 8GB storage Audio 1 audio output(line out) Video HDMI2.
Living body detection UI interface configuration support support upgrade support Deployment method Support use public network and Remote device local area network Stranger compared Support (purchase ID card with ID card reader separately) Protection class IP42, certain dust and water resistance power supply DC12V(±10%)
General parameters Operating temperature (Optional thermostat)) Working humidity 10%~90 % Power consumption 10W MAX Device size 240*120*24(mm) Weight ≈1.3kg Size (mm) Installation A.
B Appreance Instruction Desription ①According to the requirements of the installation site, in the space position on the gate, generally a hole of 35mm diameter is opened in the middle or front side.As below image,⊕ is the suggest place for open a hole. Note:The position of the hole should be based on the actual application scenario and gate type, 50cm is only a reference value. ②Unscrew the nut at the bottom of the gate head post, thread the cable out of the nut, and remove the nut as shown.
③Insert the gate head and cable from top to bottom into the opening hole, as shown in the figure. ④Under the gate, pass the cable and cable interface through the nut in turn, and tighten the nut to the thread, as shown in the figure.
⑤Connect power,network to starting machine. ⑥Hold the frame with both hands and turn it gently to adjust the gate angle, as shown in the figure. According to the recognition interface, adjust the gate head to a proper recognition angle. FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.