User manual MivaTek Low Power Wi-Fi Module Model No: MODCC32 1/4
Pins of CC3200 Module Pin Function Remark 1 Power GDN 2 nREST 3 NC 4 NC 5 NC 6 NC 7 NC 8 NC 9 ALARM1 10 POWER VCC3.3V 11 AlARM2 12 GPIO5 13 NC 14 NC 15 GPIO6 16 GPIO7 17 GPIO8 18 GPIO9 19 POWER GND 20 POWER VCC3.
Description The CC3200 Module works at Client mode. When powered on, it get into deep sleep mode as soon as possible. If an event was detected, the MCU will send a signal to CC3200 module to wake up the module. Then the module will check if the message was ture or false. If it is a real event, the module will connect to the master and send the event alert out via wifi. When the meassage was sent out and an ACK was received, the module will get into deep sleep mode again as soon as possible.
FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s) . Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.